NextSDS Logo
Safety Data Sheet EN

EXC90603 UV VARNISH FLEXO

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
EXC90603 UV VARNISH FLEXO
Product Form
Mixture
Product Code
EXC90603

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Main use category : Industrial use

Uses advised against

No additional information available

Manufacturers & Suppliers

T

Toyo Ink Europe NV

manufacturer

Tunnelweg, 3, B-2845 Niel - Belgique-Belgie

+32 (0)3 880 67 67

Emergency Contacts

Emergency Contact

+32 (0)70 245 245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Eye Irrit. Cat. 2 H319
Skin Irrit. Cat. 2 H315
Skin Sens. Cat. 1 H317
Aquatic Chronic Cat. 3 H412

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 Wash hands, forearms and face thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P321 Specific treatment (see supplemental first aid instruction on this label).
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P501 Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Acrylated Oligomer 195008-76-5 50 - 60% Yes
(1-methyl-1,2-ethanediyl)bis[(oxy(methyl-2,1-ethanediyl)] diacrylate EC: 256-032-2 42978-66-5 5 - 7% Yes
Diphenyl ketone EC: 204-337-6 119-61-9 5% Yes
2-hydroxy-2-methylpropiophenone EC: 231-272-0 7473-98-5 2.5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air and keep comfortable for breathing.

Skin contact

Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs: Get medical advice/attention.

Symptoms: Irritation. May cause an allergic skin reaction.

Eye contact

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.

Symptoms: Eye irritation.

Ingestion

Rinse mouth. Do not induce vomiting.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use dry chemical, CO2, water spray or alcohol-resistant foam.

Unsuitable media

Do not use a heavy water stream.

Specific hazards

No additional information available

Instructions

Use water spray or fog for cooling exposed containers.

Firefighter Protection

Do not attempt to take action without suitable protective equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid contact with skin and eyes. Avoid breathing dust/fume/gas/mist/vapours/spray.

Environmental

Avoid release to the environment.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with skin and eyes. Wear personal protective equipment. Avoid breathing dust/fume/gas/mist/vapours/spray.

Storage

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep away from heat and direct sunlight. Store in a well-ventilated place. Keep cool.

Hygiene

Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed out of the workplace.

Fire prevention

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Liquid.
Colour
colourless to slightly yellow.
Colour Intensity
---
Form
---
Odor
characteristic.
Odor Threshold
---
Ph
---
Melting Point
---
Boiling Point
---
Flash Point
> 100 °C
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
≈ 1 g/cm³
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
Material insoluble in water.
Partition Coefficient
---
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

May polymerize.

Hazardous reactions

No dangerous reactions known under normal conditions of use.

Avoid

Direct sunlight. Heat.

Incompatible

Oxidizing agent. Alkali. Strong acids.

Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for EXC90603 UV VARNISH FLEXO?

The signal word is warning.

What is the physical form of EXC90603 UV VARNISH FLEXO?

EXC90603 UV VARNISH FLEXO is a liquid appearing as liquid. with colourless to slightly yellow. color. It has characteristic. odor.

What is the solubility of EXC90603 UV VARNISH FLEXO?

Material insoluble in water.

What is EXC90603 UV VARNISH FLEXO used for?

Main use category : Industrial use

What are the hazard statements for EXC90603 UV VARNISH FLEXO?

This substance has 4 hazard statements:

  • H315: Causes skin irritation.
  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.
  • H412: Harmful to aquatic life with long lasting effects.