Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- UV2085 - UV Flexo Benzo-free Release Varnish
- Product Form
- Article
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Main use category : Professional use
Uses advised against
No additional information available
Manufacturers & Suppliers
GeKa Coatings
manufacturer
Clemence dosschestraat 17, 9800 Deinze - België
+3293838819
http://www.gekacoatings.com
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| (1-methyl-1,2-ethanediyl)bis[oxy(methyl-2,1-ethanediyl)]diacrylate EC: 256-032-2 | 42978-66-5 | 25 - 35% | Yes |
| Acrylic resin EC: 500-130-2 | 55818-57-0 | 20 - 30% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing.
Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs: Get medical advice/attention.
Symptoms: Irritation. May cause an allergic skin reaction.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a physician immediately.
Symptoms: Serious damage to eyes.
Call a poison center or a doctor if you feel unwell.
Immediate Medical Attention
Call a physician immediately (eye contact). Get medical advice/attention if skin irritation or rash occurs. Call a poison center or a doctor if you feel unwell (ingestion).
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Dry powder. Foam. Carbon dioxide.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate spillage area. Avoid contact with skin and eyes. Avoid breathing vapours, spray, gas, dust, fume, mist.
Avoid release to the environment.
Take up liquid spill into absorbent material.
Related Products
Similar products with comparable safety profiles
UV2214 - UV Flexo Matt Varnish
---
UV2007 - UV Flexo Low Migration Varnish
---
UV2237 - UV Flexo Low Migration TTR Gloss Varnish
---
UV2389 - Hydro UV Flexo Primer
---
EXC90603 UV VARNISH FLEXO
---
RBC1ULMG004 - Flexo UV low migration high slip varnish
---
UV7006 - UV Flexo Adhesive
---
UV2015 - UV Flexo Matt Primer For Difficult Substrates
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation of the work station. Avoid contact with skin and eyes. Wear personal protective equipment. Avoid breathing vapours, spray, mist, gas, fume, dust.
Store in a well-ventilated place. Keep cool. Protect against frost. Keep out of direct sunlight.
Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Protective gloves
Safety glasses
In case of insufficient ventilation, wear suitable respiratory equipment
Wear suitable protective clothing
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
The product is non-reactive under normal conditions of use, storage and transport.
No dangerous reactions known under normal conditions of use.
None under recommended storage and handling conditions (see section 7).
No additional information available
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for UV2085 - UV Flexo Benzo-free Release Varnish?
The signal word is danger.
What is the physical form of UV2085 - UV Flexo Benzo-free Release Varnish?
UV2085 - UV Flexo Benzo-free Release Varnish is a liquid appearing as liquid. . It has characteristic. odor.
What is the solubility of UV2085 - UV Flexo Benzo-free Release Varnish?
insoluble in water.
What is UV2085 - UV Flexo Benzo-free Release Varnish used for?
Main use category : Professional use
What are the hazard statements for UV2085 - UV Flexo Benzo-free Release Varnish?
This substance has 5 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H318: Causes serious eye damage.
- H335: May cause respiratory irritation.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of UV2085 - UV Flexo Benzo-free Release Varnish?
The melting point is Not applicable and the boiling point is > 200 °C.