Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LE2004 - LED Flexo Release Varnish
- Product Form
- Article
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
GeKa Coatings
Clemence dosschestraat 17, 9800 Deinze - België
+3293838819
http://www.gekacoatings.com
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-Propenoic acid, 2-ethyl-2-[[(1-oxo-2-propenyl)oxy]methyl]-1,3-propanediyl ester EC: 239-701-3 | 15625-89-5 | 20 - 30% | Yes |
| Acrylic resin EC: 500-130-2 | 55818-57-0 | 10 - 15% | Yes |
| (1-methyl-1,2-ethanediyl)bis[oxy(methyl-2,1-ethanediyl)]diacrylate EC: 256-032-2 | 42978-66-5 | 5 - 10% | Yes |
| diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide EC: 278-355-8 | 75980-60-8 | 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing.
Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs: Get medical advice/attention.
Symptoms: Irritation. May cause an allergic skin reaction.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Symptoms: Eye irritation.
Call a poison center or a doctor if you feel unwell.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Dry powder. Foam. Carbon dioxide.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate spillage area. Avoid contact with skin and eyes. Avoid breathing dust/fume/gas/mist/vapours/spray.
Avoid release to the environment.
Take up liquid spill into absorbent material.
Related Products
Similar products with comparable safety profiles
UV2214 - UV Flexo Matt Varnish
---
UV2085 - UV Flexo Benzo-free Release Varnish
---
UV2007 - UV Flexo Low Migration Varnish
---
RBC1ULMG004 - Flexo UV low migration high slip varnish
---
EXC90004/E UV VARNISH FLEXO EXCURE
---
UV2237 - UV Flexo Low Migration TTR Gloss Varnish
---
EXC99059 UV VARNISH FLEXO LO
---
UV7006 - UV Flexo Adhesive
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear personal protective equipment. Avoid contact with skin and eyes. Avoid breathing dust/fume/gas/mist/vapours/spray.
Store locked up. Store in a well-ventilated place. Keep cool.
Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Protective gloves
Safety glasses
[In case of inadequate ventilation] wear respiratory protection.
Wear suitable protective clothing
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
The product is non-reactive under normal conditions of use, storage and transport.
No dangerous reactions known under normal conditions of use.
None under recommended storage and handling conditions (see section 7).
No additional information available
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LE2004 - LED Flexo Release Varnish?
The signal word is warning.
What is the physical form of LE2004 - LED Flexo Release Varnish?
LE2004 - LED Flexo Release Varnish is a liquid appearing as liquid. with no data available color. It has characteristic. odor.
What is the solubility of LE2004 - LED Flexo Release Varnish?
insoluble in water.
What are the hazard statements for LE2004 - LED Flexo Release Varnish?
This substance has 5 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H361: Suspected of damaging fertility. Suspected of damaging the unborn child, Suspected of damaging fertility, Suspected of damaging the unborn child. (in contact with skin, if swallowed, if inhaled).
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of LE2004 - LED Flexo Release Varnish?
The melting point is Not applicable and the boiling point is > 200 °C.