Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Tetrahydrofuran
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Intermediate
Manufacturers & Suppliers
BASF Aktiengesellschaft
manufacturer
Unternehmensbereich Zwischenprodukte, 67058 Ludwigshafen
0621-60-42259
Emergency Contacts
Fire brigade BASF Ludwigshafen
0621-60-43333
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS02
GHS07
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| tetrahydrofuran EC: 203-726-8 | 109-99-9 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Keep patient calm, remove to fresh air, seek medical attention.
Wash thoroughly with soap and water.
Immediately wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye specialist.
Rinse mouth and then drink plenty of water.
Immediate Medical Attention
Seek medical attention (inhalation), consult an eye specialist (eye contact).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water, dry extinguishing media, foam, carbon dioxide
Firefighter Protection
Wear self-contained breathing apparatus and chemical-protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Pump off large amounts.
Do not empty into drains.
Pick up residues with suitable absorbent material (e.g. sand, sawdust, general-purpose binder, kieselguhr).
Materials: sand, sawdust, general-purpose binder, kieselguhr
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure thorough ventilation of stores and work areas. Prevent contact with air/oxygen (formation of peroxide). Handle under dry inert gas.
Keep container tightly closed. Keep under nitrogen.
Prevent electrostatic charge - sources of ignition should be kept well clear - fire extinguishers should be kept handy.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical resistant protective gloves (EN 374) Suitable materials also with prolonged, direct contact (Recommended: Protective Index 6, corresponding > 480 minutes of permeation time according to EN 374) Polyethylene-Laminate (PE laminate) - ca. 0.1 mm coating thickness Supplementary note: The specifications are based on own tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined in accordance to EN 374.
Safety glasses with side-shields (frame goggles) (EN 168)
Breathing protection if ventilation is inadequate.
Wearing of closed work clothing is required additionally to the stated personal protection equipment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Evolution of peroxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2056
- Shipping Name
- TETRAHYDROFURAN
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Tetrahydrofuran?
The signal word is danger.
What is the physical form of Tetrahydrofuran?
Tetrahydrofuran is a liquid appearing as colourless with colourless color. It has of acetone odor.
What is the solubility of Tetrahydrofuran?
miscible with many organic solvents
What is Tetrahydrofuran used for?
Intermediate
What are the hazard statements for Tetrahydrofuran?
This substance has 2 hazard statements:
- H225: Highly flammable
- H335: Irritating to eyes and respiratory system
What is the melting point of Tetrahydrofuran?
The melting point is -108,60 °C and the boiling point is 65,8 - 66,5 °C.