Silver nitrate for analysis EMSURE®

After inhalation: fresh air. Call in physician.

Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately.

After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses.

After swallowing: make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise.

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

For this substance/mixture no limitations of media extinguishing agents are given.

Not combustible. Fire may cause evolution of: nitrogen oxides Has a fire-promoting effect due to release of oxygen. Ambient fire may liberate hazardous vapours.

Suppress (knock down) gases/vapours/mists with a water spray jet.

Avoid inhalation of dusts. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.

Do not let product enter drains.

Cover drains. Collect, bind, and pump off spills. Take up carefully. Clean up affected area.

Work under hood. Do not inhale substance/mixture.

Protected from light. Tightly closed. Keep locked up or in an area accessible only to qualified or authorised persons. Do not store near combustible materials.

Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.

Keep away from open flames, hot surfaces and against fire and explosion sources of ignition.

Material : Nitrile rubber Break through time : 480 min Glove thickness : 0,11 mm Protective index : Full contact Manufacturer : KCL 741 Dermatril® L Material : Nitrile rubber Break through time : 480 min Glove thickness : 0,11 mm Protective index : Splash contact Manufacturer : KCL 741 Dermatril® L Remarks : This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D- 36124 Eichenzell, Internet: www.kcl.de).

Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Tightly fitting safety goggles

required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter : Filter type P3 type: The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

protective clothing

Do not let product enter drains.

The product is chemically stable under standard ambient conditions (room temperature) .

No data available

Risk of explosion with: Acetaldehyde Acetylene Nitriles Ammonia ammonium hydroxide azides combustible substances carbides ethanol Fluoroacetylene Hydrazine hydrate acetylidene Sodium hydroxide Nitromethane Organic Substances phosphorus phosphorus hydrogen sulfur Titanium Zinc charcoal Activated charcoal Ammonia with ethanol Ammonia with Sodium hydroxide solution powdered magnesium with Water Risk of ignition or formation of inflammable gases or vapours with: arsenic oxidisable substances Exothermic reaction with: nonmetals oxidisable substances iodides strong reducing agents halogen-halogen compounds

no information available

No data available

In the event of fire: see section 5