NextSDS Logo
Safety Data Sheet EN

VIROTROL® HIV-2

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
VIROTROL® HIV-2
Product Code
00105, 00105A, 00105B, 00105C

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Sector of Use SU20 Health services. Application of the substance / the mixture In-vitro laboratory reagent or component

Manufacturers & Suppliers

B

Bio-Rad Laboratories S.A.-N.V.

manufacturer

Begoniastraat 5, B-9810 Nazareth-Eke, Belgium

32-9-385-5511

Emergency Contacts

Emergency Contact

09-385-5511

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Sens. Cat. 1 H317

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H317 May cause an allergic skin reaction.

Precautionary Statements

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
P363 Wash contaminated clothing before reuse.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mixture of the substances listed below with nonhazardous additions.

Chemical Name CAS Number Concentration Hazardous
5-chloro-2-methyl-2H-isothiazol-3-one EC: 247-500-7 26172-55-4 0.001 - 0.01% Yes

Contains human sourced and/or potentially infectious components.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air and to be sure call for a doctor.

Skin contact

Immediately wash with water and soap and rinse thoroughly.

Symptoms: Skin irritation

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Symptoms: Eye irritation

Ingestion

Rinse mouth with water.

Immediate Medical Attention

Seek medical attention and appropriate follow-up.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

Specific hazards

No further relevant information available.

Firefighter Protection

Wear self-contained respiratory protective device.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Handle as potentially infectious.

Environmental

Keep contaminated washing water and dispose of appropriately.

Cleanup methods

Pick up mechanically. Clean the affected area carefully.

Materials: Disinfectant

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

No special precautions are necessary if used correctly.

Storage

Requirements to be met by storerooms and receptacles: According to product specification. Refer to package insert for additional information regarding storage conditions.

Fire prevention

No special measures required.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Protective gloves. Material of gloves: Synthetic gloves. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.

Eyes

Safety glasses

Respiratory

Not required.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Colour
Light yellow
Crystallisation Point
---
Voc Content
---
Vapor Density
---
Upper Explosive Limit
---
Solubility
---
Cloud Point
---
Freezing Point
---
Vapor Pressure
Not determined.
Relative Evaporation Rate
---
Density
Not determined
Colour Intensity
---
Kinematic Viscosity
---
Flash Point
Not applicable
Form
Liquid
State Under Standard Conditions
---
Evaporation Rate
---
Solubility In Fat
---
Melting Point
undetermined
Ph
7,7-7,9
Physical State Data
liquid
Molecular Weight
---
Appearance
Light yellow
Solubility In Water
Fully miscible
Physical State
liquid
Partition Coefficient
---
Explosive Limits
---
Properties Status
---
Bulk Density
---
Lower Explosive Limit
---
Boiling Point
undetermined
Odor Threshold
---
Dynamic Viscosity
---
Decomposition Temperature
---
Softening Point
---
Auto Ignition Temperature
---
Metal Corrosion
---
Relative Density
---
Solidification Point
---
Odor
Mild
Flammability
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No decomposition if used according to specifications.

Hazardous reactions

No dangerous reactions known

Avoid

No decomposition if used according to specifications.

Incompatible

No further relevant information available.

Decomposition

No dangerous decomposition products known

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for VIROTROL® HIV-2?

The signal word is warning.

What is the physical form of VIROTROL® HIV-2?

VIROTROL® HIV-2 is a liquid appearing as light yellow with light yellow color. It has mild odor.

What is VIROTROL® HIV-2 used for?

Sector of Use SU20 Health services. Application of the substance / the mixture In-vitro laboratory reagent or component

What are the hazard statements for VIROTROL® HIV-2?

This substance has 1 hazard statement:

  • H317: May cause an allergic skin reaction.

What is the melting point of VIROTROL® HIV-2?

The melting point is undetermined and the boiling point is undetermined.