Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- VIROTROL ® I
- Product Code
- 00100, 00101, 00102, 00100A, 00100B, 00100C, 00100E, 00100F, 00100G, 00100H, 00101B, 00101C, 00101D, 00101E, 00101F, 00101G, 00102B, 00102C
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Sector of Use SU20 Health services. Application of the substance / the mixture In-vitro laboratory reagent or component
Manufacturers & Suppliers
Bio-Rad Laboratories S.A.-N.V.
manufacturer
Begoniastraat 5, B-9810 Nazareth-Eke, Belgium
32-9-385-5511
Emergency Contacts
Emergency Contact
09-385-5511
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of the substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 5-chloro-2-methyl-2H-isothiazol-3-one EC: 247-500-7 | 26172-55-4 | 0.001 - 0.01% | Yes |
Contains human sourced and/or potentially infectious components. Contains added constituents of animal origin.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air and to be sure call for a doctor.
Immediately wash with water and soap and rinse thoroughly.
Symptoms: Skin irritation
Rinse opened eye for several minutes under running water. Then consult a doctor.
Symptoms: Eye irritation
Rinse mouth with water. Seek medical attention and appropriate follow-up.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Firefighter Protection
Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Handle as potentially infectious.
Keep contaminated washing water and dispose of appropriately.
Pick up mechanically. Clean the affected area carefully.
Materials: Disinfectant
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special precautions are necessary if used correctly.
According to product specification. Refer to package insert for additional information regarding storage conditions.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves. Material of gloves: Synthetic gloves. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses
Not required.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No dangerous reactions known
No decomposition if used according to specifications.
No further relevant information available.
No dangerous decomposition products known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for VIROTROL ® I?
The signal word is warning.
What is the physical form of VIROTROL ® I?
VIROTROL ® I is a liquid appearing as liquid with light yellow color. It has mild odor.
What is VIROTROL ® I used for?
Sector of Use SU20 Health services. Application of the substance / the mixture In-vitro laboratory reagent or component
What are the hazard statements for VIROTROL ® I?
This substance has 1 hazard statement:
- H317: May cause an allergic skin reaction.
What is the melting point of VIROTROL ® I?
The melting point is undetermined and the boiling point is undetermined.