NextSDS Logo
Safety Data Sheet EN

Yeast Nitrogen Base

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Yeast Nitrogen Base
Product Code
239210

Regulatory Identifiers

CAS Number
N/A

Identified Uses

In-vitro Diagnostics

Uses advised against

No further relevant information available.

Manufacturers & Suppliers

B

BD Diagnostic Systems

manufacturer

7 Loveton Circle, Sparks, MD 21152

(410) 771 - 0100 or (800) 638 – 8663

Emergency Contacts

BD Diagnostic Systems

(410) 771-0100

BD Diagnostic Systems

(800)-638-8663

ChemTrec

(800) 424-9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4 H302
Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2A H319
STOT SE Cat. 3 H335

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H302 Harmful if swallowed.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.

Precautionary Statements

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 Wash thoroughly after handling.
P270 Do no eat, drink or smoke when using this product.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301 + P312 IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P304 + P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P312 Call a POISON CENTER or doctor/physician if you feel unwell.
P321 Specific treatment (see on this label).
P330 Rinse mouth.
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P362 Take off contaminated clothing and wash before reuse.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mixture consisting of the following components.

Chemical Name CAS Number Concentration Hazardous
ammonium sulfate EC: 231-984-1 7783-20-2 74.07% Yes

Additional information Risk phrases refer to section 15.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Seek medical treatment in case of complaints.

Skin contact

Immediately wash with water and soap and rinse thoroughly.

Eye contact

Rinse opened eye for 15 minutes under running water. Then consult a doctor.

Ingestion

If symptoms persist consult doctor.

Medical Treatment

Show this product label or this MSDS.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, ABC multipurpose dry chemical or water spray. Fight larger fires with water spray or alcohol resistant foam.

Firefighter Protection

No special measures required.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Not required

Environmental

Wipe up with damp sponge or mop.

Cleanup methods

No special measures required.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Ensure good ventilation/exhaustion at the workplace.

Storage

Store in cool, dry conditions in well sealed containers.

Fire prevention

No special measures required.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

chemical fume hood

Hands

Chemical resistant gloves (i.e. nitrile, or equivalent).

Eyes

Safety glasses

Respiratory

In case of brief exposure, use a NIOSH/MSHA-approved respirator.

Skin/Body

Protective work clothing (lab coat).

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Solid
Physical State Data
solid
State Under Standard Conditions
---
Appearance
Whitish
Colour
Whitish
Colour Intensity
---
Form
Powder
Odor
Characteristic
Odor Threshold
---
Ph
5.4 +/- 0.2
Melting Point
Not determined
Boiling Point
Not determined
Flash Point
Not applicable
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
Not determined
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
Product is not self igniting.
Decomposition Temperature
---
Solubility
---
Partition Coefficient
---
Solubility In Water
Soluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No decomposition if used according to specifications.

Hazardous reactions

No dangerous reactions known

Avoid

No decomposition if used according to specifications.

Incompatible

Strong Bases and oxidizers

Decomposition

Carbon dioxide (CO2), Nitrogen oxides (NOx), Sulfur oxides (SOx), Ammonia (NH4)

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Yeast Nitrogen Base?

The signal word is warning.

What is the physical form of Yeast Nitrogen Base?

Yeast Nitrogen Base is a solid appearing as whitish with whitish color. It has characteristic odor.

What is Yeast Nitrogen Base used for?

In-vitro Diagnostics

What are the hazard statements for Yeast Nitrogen Base?

This substance has 4 hazard statements:

  • H302: Harmful if swallowed.
  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation.

What is the melting point of Yeast Nitrogen Base?

The melting point is Not determined and the boiling point is Not determined.