Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- IRON2
- Product Code
- 03183696122
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Roche Diagnostics Deutschland GmbH
manufacturer
Sandhoferstrasse 116, 68305 Mannheim
+496217590
Roche Diagnostics GmbH
manufacturer
Emergency Contacts
Central Works Security
+49(0)621-759-2203
Mainz
+49(0)6131-19240
Munich
+49(0)89-19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Isotridecyl(PEG-Ether)n n=8 EC: 500-027-2 | 9043-30-5 | 3 - 10% | Yes |
| Citric acid monohydrate EC: 201-069-1 | 5949-29-1 | 3 - 10% | Yes |
| thiourea EC: 200-543-5 | 62-56-6 | 0.3 - 1% | Yes |
| 1-[1,3-bis(hydroxymethyl)-2,5-dioxoimidazolidin-4-yl]-1,3-bis(hydroxymethyl)urea EC: 278-928-2 | 78491-02-8 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.
If on skin, rinse well with water. If on clothes, remove clothes. Immediate medical treatment is necessary as untreated wounds from corrosion of the skin heal slowly and with difficulty.
Symptoms: Corrosion of the skin.
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Continue rinsing eyes during transport to hospital. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
Symptoms: Small amounts splashed into eyes can cause irreversible tissue damage and blindness.
Keep respiratory tract clear. Do NOT induce vomiting. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Take victim immediately to hospital. Rinse mouth with water.
Immediate Medical Attention
Take victim immediately to hospital. Immediate medical treatment is necessary as untreated wounds from corrosion of the skin heal slowly and with difficulty.
Medical Treatment
The first aid procedure should be established in consultation with the doctor responsible for industrial medicine.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
High volume water jet
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Refer to protective measures listed in sections 7 and 8.
Prevent product from entering drains. Prevent further leakage or spillage if safe to do so.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not breathe vapours/dust. Avoid exposure - obtain special instructions before use. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Dispose of rinse water in accordance with local and national regulations. Persons susceptible to skin sensitisation problems or asthma, allergies, chronic or recurrent respiratory disease should not be employed in any process in which this mixture is being used. To prevent leaks or spillages from spreading, provide a suitable liquid retention system.
Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.
When using do not eat or drink. When using do not smoke. Wash hands before breaks and at the end of workday.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No data available
In case of full contact: Material: Fluorinated rubber, Break through time: 480 min, Glove thickness: 0,7 mm. In case of contact through splashing: Material: Nitrile rubber, Break through time: 30 min, Glove thickness: 0,2 mm. Remarks: The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. This recommendation is only valid for the product mentioned in the safety data sheet and provided by us and for the application specified by us. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. The suitability for a specific workplace should be discussed with the producers of the protective gloves.
Eye wash bottle with pure waterTightly fitting safety gogglesWear face-shield and protective suit for abnormal processing problems.
In the case of vapour formation use a respirator with an approved filter.
Impervious clothingChoose body protection according to the amount and concentration of the dangerous substance at the work place.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
No decomposition if stored and applied as directed.
No data available
No data available
No data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for IRON2?
The signal word is danger.
What is the physical form of IRON2?
IRON2 is a liquid appearing as liquid with colourless color. It has no data available odor.
What are the hazard statements for IRON2?
This substance has 2 hazard statements:
- H314: Causes severe skin burns and eye damage.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of IRON2?
The melting point is No data available and the boiling point is No data available.