NextSDS Logo
Safety Data Sheet EN

BONEDRY™

CAS 1910-42-5

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONEDRY™
Chemical Name
1,1'-Dimethyl-4,4'-bipyridinium dichloride

Regulatory Identifiers

CAS Number
1910-42-5 Check regulations →

Manufacturers & Suppliers

S

SINON USA, Inc

distributor

1080 Carol Lane, Suite 264, Lafayette, CA94549

1-925-2991418

S

SINON Corporation

manufacturer

111, Chung Shan Road, Ta-Tu District, Taichung, Taiwan, R.O.C.

886-4-26933841

Emergency Contacts

CHEMTREC

1-800-424-9300

Day or Night

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H304 May be fatal if swallowed
H312 Harmful if absorbed through skin
H318 Causes substantial but temporary eye injury

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Paraquat Emetic --- --- No
Paraquat Dichloride (43.8% w/w) --- 43.8% No

Values are not product specifications.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move person to fresh air. If person is not breathing, call 911 or an ambulance. Call a poison control center or doctor for further treatment advice.

Skin contact

If on skin or clothing: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call CHEMTREC (1-800-424-9300), a poison control center or doctor for treatment advice.

Eye contact

If in eyes: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after 5 minutes, then continue rinsing eye. Call CHEMTREC (1-800-424-9300), a poison control center or doctor for treatment advice.

Ingestion

If available, give an adsorbent such as activated charcoal, bentonite or Fuller's Earth. Call a poison control center or doctor immediately for treatment advice. Do not give anything by mouth to an unconscious person.

Immediate Medical Attention

SPEED IS ESSENTIAL. Immediate medical attention is required.

Medical Treatment

Administer either activated charcoal (100 g for adults or 2 g/kg body weight in children) or Fuller's Earth (15% solution; 1 liter for adults or 15 ml/kg body weight in children). The use of gastric lavage without administration of an adsorbent has not shown any clinical benefit. Eye splashes from concentrated material should be treated by an eye specialist after initial treatment. Use treatment that is appropriate for chemical burns.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use dry chemical, foam or CO2 extinguishing media.

Specific hazards

Hydrolyzes in alkaline media. This product reacts with aluminum to produce hydrogen gas. During a fire, irritating and possibly toxic gases may be generated by thermal decomposition or combustion.

Firefighter Protection

Wear full protective clothing and self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Control the spill at its source. Contain the spill to prevent from spreading or contaminating soil or from entering sewage and drainage systems or any body of water. Clean up spills immediately, observing precautions outlined in Section 8. Cover entire spill with absorbing material and place into compatible disposal container. Scrub area with hard water detergent (e.g. commercial products such as Tide, Joy, Spic and Span). Pick up wash liquid with additional absorbent and place into compatible disposal container. Once all material is cleaned up and placed in a disposal container, seal container and arrange for disposition.

Environmental

Contain the spill to prevent from spreading or contaminating soil or from entering sewage and drainage systems or any body of water.

Cleanup methods

Cover entire spill with absorbing material and place into compatible disposal container. Scrub area with hard water detergent (e.g. commercial products such as Tide, Joy, Spic and Span). Pick up wash liquid with additional absorbent and place into compatible disposal container.

Materials: absorbing material, hard water detergent (e.g. commercial products such as Tide, Joy, Spic and Span), additional absorbent

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid all contact with the skin, eyes, nose and mouth. Wash thoroughly with soap and water after handling.

Storage

Store above 0°C (32°F). Store the material in a well-ventilated, secure area out of reach of children and domestic animals.

Hygiene

Wash thoroughly with soap and water after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use effective engineering controls to comply with occupational exposure limits.

Hands

waterproof gloves

Eyes

safety glasses with side shields or chemical goggles

Respiratory

A respirator is not normally required when handling this substance. In case of emergency spills, use a NIOSH approved respirator with any N, R, P or HE filter.

Skin/Body

long-sleeved shirt and long pants, shoes and socks, face shield and chemical-resistant apron. Remove any contaminated clothing promptly.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Dark green liquid
Colour
Dark green
Colour Intensity
---
Form
liquid
Odor
Strong; pungent, obnoxious
Odor Threshold
---
Ph
5 (1% solution)
Melting Point
Not applicable
Boiling Point
105°C
Flash Point
---
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not available
Vapor Pressure
2.3 x 10^-13 Pa (25°C) (paraquat dichloride)
Vapor Density
---
Relative Density
1.126 g/ml (20°C)
Bulk Density
---
Density
---
Flammability
Non-flammable
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
Miscible in water
Partition Coefficient
Log P = -4.5 (20°C)(paraquat dichloride)
Solubility In Water
Miscible in water
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal use and storage conditions.

Hazardous reactions

reacts with aluminum to produce hydrogen gas

Avoid

Store above 0°C (32 F). Decomposed by alkali and in the presence of U.V. light. Compound inactivated by adsorption onto inert clay.

Incompatible

alkali, inert clay

Decomposition

Combustion products of dry material: Carbon dioxide, carbon monoxide, chlorine, hydrogen chloride; possible trace amounts of phosgene, nitrogen oxides, ammonia and other toxic and noxious fumes.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
2922
Shipping Name
Corrosive Liquid, Toxic, N.O.S. (Paraquat)
Transport Class
8 (6.1)
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONEDRY™?

The signal word is danger.

What is the physical form of BONEDRY™?

BONEDRY™ is a liquid appearing as dark green liquid with dark green color. It has strong; pungent, obnoxious odor.

What is the solubility of BONEDRY™?

Miscible in water

What are the hazard statements for BONEDRY™?

This substance has 3 hazard statements:

  • H304: May be fatal if swallowed
  • H312: Harmful if absorbed through skin
  • H318: Causes substantial but temporary eye injury

What is the melting point of BONEDRY™?

The melting point is Not applicable and the boiling point is 105°C.