Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE S-AD 85
- Product Code
- 1357615
- Synonyms
- RODINE 85
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Acid inhibitor additive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelina.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The data for this section has not been processed yet.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Remove contaminated clothing and footwear. For skin contact flush with large amounts of water. If skin irritation persists, call a physician. Launder contaminated clothing before reuse.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. DO NOT induce vomiting unless directed to do so by medical personnel. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation). If skin irritation persists, call a physician. Seek immediate medical attention for eye contact and ingestion.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Protect from freezing.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
May react with strong bases or oxidizing agents.
None under normal processing.
Keep away from alkalis.
Alkalis.
Upon decomposition, product emits acrid dense smoke with carbon dioxide, carbon monoxide, trace oxides of nitrogen and sulfur, and water. Upon combustion, oxides of chlorine may be released.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3265
- Shipping Name
- Corrosive liquid, acidic, organic, n.o.s. (o-Toluidine hydrochloride copolymer)
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE S-AD 85 known by?
BONDERITE S-AD 85 is also known as: RODINE 85
What is the hazard signal word for BONDERITE S-AD 85?
The signal word is danger.
What is the physical form of BONDERITE S-AD 85?
BONDERITE S-AD 85 is a liquid with red color. It has aromatic odor.
What is the solubility of BONDERITE S-AD 85?
Complete
What is BONDERITE S-AD 85 used for?
Acid inhibitor additive
What are the hazard statements for BONDERITE S-AD 85?
This substance has 3 hazard statements:
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
- H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of BONDERITE S-AD 85?
The melting point is 25 °F (-3.9 °C) and the boiling point is Not determined.