Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Shandon TBD-1 Decalcifier
- Product Code
- 6764001, 6764002
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Richard Allan Scientific
manufacturer
4481 Campus Drive, Kalamazoo, MI 49008
(800) 522-7270
Emergency Contacts
Chemtrec US
(800) 424-9300
Chemtrec EU
(202) 483-7616
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Water | 7732-18-5 | 50 - 60% | No |
| Hydrochloric acid | 7647-01-0 | 35 - 40% | No |
| Polyvinyl pyrrolidone | 9003-39-8 | 5 - 10% | No |
| Fluorad | 33454-82-9 | 1% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. Do not use mouth-to-mouth resuscitation if victim ingested or inhaled the substance; induce artificial respiration with a respiratory medical device.
Wash off immediately with plenty of water for at least 15 minutes.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Do not induce vomiting. Call a physician or Poison Control Center immediately.
Immediate Medical Attention
Immediate medical attention is required.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO₂, dry chemical, dry sand, alcohol-resistant foam.
Keep product and empty container away from heat and sources of ignition
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Use personal protective equipment. Keep people away from and upwind of spill/leak. Evacuate personnel to safe areas.
Should not be released into the environment.
Soak up with inert absorbent material. Keep in suitable and closed containers for disposal.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only under a chemical fume hood. Wear personal protective equipment. Do not get in eyes, on skin, or on clothing. Do not breathe vapors/dust. Do not ingest.
Keep containers tightly closed in a dry, cool and well-ventilated place. Corrosives area.
Do not get in eyes, on skin, or on clothing. Do not ingest.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use only under a chemical fume hood. Ensure that eyewash stations and safety showers are close to the workstation location.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None under normal processing.
Hazardous polymerization does not occur.
Incompatible products. Excess heat.
Strong oxidizing agents, Strong acids, Strong bases
Carbon monoxide (CO), Carbon dioxide (CO₂), Hydrocarbons, Chlorine
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1789
- Shipping Name
- HYDROCHLORIC ACID SOLUTION
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Shandon TBD-1 Decalcifier?
The signal word is danger.
What is the physical form of Shandon TBD-1 Decalcifier?
Shandon TBD-1 Decalcifier is a liquid appearing as clear light yellow . It has pungent odor.
What is the solubility of Shandon TBD-1 Decalcifier?
No information available.
What are the hazard statements for Shandon TBD-1 Decalcifier?
This substance has 6 hazard statements:
- H302: May be harmful if swallowed.
- H312: May be harmful in contact with skin.
- H314: Causes burns by all exposure routes.
- H332: May be harmful if inhaled.
- H360: Experiments have shown reproductive toxicity effects on laboratory animals.
- H412: May cause adverse kidney effects.
What is the melting point of Shandon TBD-1 Decalcifier?
The melting point is No information available. and the boiling point is 110°C / 230°F.