Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Decalcifier DC3 Q Path
- Product Code
- 09128300
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- This product is a mixture. See section 3 for EU REACH registration numbers when applicable.
Identified Uses
General chemical reagent
Uses advised against
The product, as such or as a component of a mixture, is not intended to be used by consumers (as defined by the REACH Regulation).
Manufacturers & Suppliers
VWR International Ltd.
distributor
Orion Business Campus, Northwest Business Park, Ballycoolin, Dublin 15, Republic of Ireland
+353 1 8822222
Emergency Contacts
CareChem24
+44 (0) 1270 502894
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest. When in doubt or if symptoms are observed, get medical advice.
Remove contaminated, saturated clothing immediately. Wash off any skin contamination immediately. When in doubt or if symptoms are observed, get medical advice.
Symptoms: Irritation.
Rinse immediately carefully and thoroughly with eye-bath or water. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Consult an ophthalmologist.
Symptoms: Irritation. Conjunctival redness.
Rinse mouth immediately and drink 1 glass of of water. Never give anything by mouth to an unconscious person or a person with cramps. Get medical advice/attention.
Symptoms: Nausea.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
ABC-powder, Carbon dioxide (CO2), Dry sand, Nitrogen
Water spray, Full water jet
The product itself does not burn. Non-combustible corrosive substances (liquid). Fire may produce irritating, corrosive and/or toxic gases. Substance is non-flammable. Adapt fire and explosion protection measures to the combustible substances in the area.
Co-ordinate fire-fighting measures to the fire surroundings.
Firefighter Protection
Wear a self-contained breathing apparatus and chemical protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove victim out of the danger area. Provide adequate ventilation.
Absorb with liquid-binding material (sand, diatomaceous earth, acid- or universal binding agents). Rinse affected areas with water.
In case of major fire and large quantities: Fight fire remotely due to the risk of explosion.
Do not allow to enter into surface water or drains.
Take up mechanically, placing in appropriate containers for disposal. Absorb spillage. Rinse affected areas with water.
Materials: sand, diatomaceous earth, acid- or universal binding agents
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use extractor hood (laboratory). Do not breathe gas/fumes/vapour/spray. Avoid contact with eyes and skin. Wear personal protection equipment (refer to section 8). Avoid exposure. Avoid contact with water. Provide adequate ventilation.
Store in a well-ventilated place. Keep container tightly closed.
Wash hands before breaks and after work. Avoid contact with eyes and skin. When using do not eat, drink or smoke. Provide eye shower and label its location conspicuously.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.
When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms EN ISO 374 In the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,12 mm, Breakthrough time: > 480 min, Recommended glove articles: VWR 112-0998. By long-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,38 mm, Breakthrough time: > 480 min, Recommended glove articles: VWR 112-3717 / 112-1381.
Eye glasses with side protection DIN-/EN-Norms EN 166. Recommendation: VWR 111-0432
Respiratory protection necessary at: aerosol or mist formation. Suitable respiratory protection apparatus: Full-/half-/quarter-face masks (EN 136/140). Recommendation: VWR 111-0206. Suitable material: ABEK2P3. Recommendation: VWR 111-0059.
Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.
no data available
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
Reactive substance. Corrosive to metals.
The product develops hydrogen in an aqueous solution in contact with metals. May cause strong formation of hydrogen by contact with amphoteric metals (e.g. aluminia, lead, zinc) - danger of explosion. Exothermic reaction with: Water. Substance, organic
No special measures are necessary.
Alkali metals, Alkaline earth metal, Alkali (lye), light metals, amphoteric metals (e.g. aluminia, lead, zinc), Water, Substance, organic
Decomposition products in case of fire: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1789
- Shipping Name
- HYDROCHLORIC ACID
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Decalcifier DC3 Q Path?
The signal word is warning.
What is the physical form of Decalcifier DC3 Q Path?
Decalcifier DC3 Q Path is a liquid with no data available color. It has no data available odor.
What is Decalcifier DC3 Q Path used for?
General chemical reagent
What are the hazard statements for Decalcifier DC3 Q Path?
This substance has 1 hazard statement:
- H290: May be corrosive to metals.
What is the melting point of Decalcifier DC3 Q Path?
The melting point is no data available and the boiling point is no data available.