Sodium peroxide granular for analysis ACS,ISO

After inhalation: fresh air. Call in physician.

Symptoms: Cough, Shortness of breath, emphysema

In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/shower. Call a physician immediately.

Symptoms: Irritation and corrosion, Pain

After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist.

Symptoms: Risk of blindness!

After swallowing: make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately.

Symptoms: Diarrhoea, Vomiting

Sand, Dry powder

Carbon dioxide (CO2), Water, Foam

Not combustible. Has a fire-promoting effect due to release of oxygen. May not get in touch with: Water. Caution! in contact with water product releases: hydrogen peroxide. Ambient fire may liberate hazardous vapours.

Avoid substance contact. Avoid inhalation of dusts. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.

Do not empty into drains. Risk of explosion.

Take up dry. Dispose of properly. Clean up affected area.

Keep workplace dry. Do not allow product to come into contact with water. Observe label precautions.

Tightly closed. Dry. Separately or together with other oxidising substances only.

Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.

Technical measures and appropriate working operations should be given priority over the use of personal protective equipment. See section 7.1.

full contact: Glove material: Nitrile rubber, Glove thickness: 0,11 mm, Break through time: > 480 min. splash contact: Glove material: Nitrile rubber, Glove thickness: 0,11 mm, Break through time: > 480 min. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril® L (full contact), KCL 741 Dermatril® L (splash contact). The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types. This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Tightly fitting safety goggles

required when dusts are generated. Recommended Filter type: Filter P 2 (acc. to DIN 3181) for solid and liquid particles of harmful substances The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

protective clothing

Do not empty into drains.

hygroscopic

Has a fire-promoting effect due to release of oxygen.

Risk of ignition or formation of inflammable gases or vapours with: Alcohols, Benzene, combustible substances, acetic acid, carbon disulfide, hydrogen sulphide, anilines, Powdered metals, Ether, ethanol, Methanol, Iron, Water, Tin. Risk of explosion with: Organic Substances, Metals, sulfur, phosphorus, performic acid, sodium thiosulphate, metallic chlorides, carbon, glycerol, Acetic anhydride, carbides, Boron, arsenic, antimony, ammonium compounds, powdered aluminium, PHOSPHORUS TRICHLORIDE, sugars, charcoal, powdered magnesium. Water, with, Organic Substances. carbon dioxide, with, Metals. Exothermic reaction with: Aldehydes, acids, nitrides, Sulphur dichloride

Exposure to moisture. Strong heating (decomposition).

no information available

no information available

yes

yes

yes