Sodium hydroxide on support granulated about 1.6-3 mm, for elementary analysis

After inhalation: fresh air. Call in physician.

In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately.

After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses.

After swallowing: make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise.

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

For this substance/mixture no limitations of extinguishing agents are given.

Not combustible. Ambient fire may liberate hazardous vapours.

Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.

Avoid inhalation of dusts. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.

Do not let product enter drains.

Take up dry. Clean up affected area.

For precautions see section 2.2.

Tightly closed. Dry. Recommended storage temperature see product label.

Full contact: Material: Nitrile rubber, Minimum layer thickness: 0,11 mm, Break through time: 480 min, Material tested: KCL 741 Dermatril® L. Splash contact: Material: Nitrile rubber, Minimum layer thickness: 0,11 mm, Break through time: 480 min, Material tested: KCL 741 Dermatril® L.

Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Tightly fitting safety goggles

Recommended Filter type: Filter B-(P3). The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

protective clothing

Do not let product enter drains.

The product is chemically stable under standard ambient conditions (room temperature).

No data available

Risk of explosion with metals and light metals. Violent reactions possible with nitriles, alkaline earth metals, ammonium compounds, cyanides, magnesium, organic nitro compounds, organic combustible substances, phenols, oxidisable substances, acetone, chlorine, ethylene oxide, fluorine, hydrogen halides, hydrazine hydrate, hydroxylamine, acid anhydrides, acrolein, acid chlorides, acids, sulphuric acid, chloroform, hydrogen peroxide, anhydrides, antimony trichloride, phosphides, halogen-halogen compounds, trichloroethene, (Methoxymethoxymethyl)tributyltin. Can decompose violently in contact with organic substances and hydrogen sulphide. Risk of ignition or formation of inflammable gases or vapours with powdered aluminium, ammonium salts, persulfates, sodium borohydride, phosphorus, oxides of phosphorus, halogenated hydrocarbon, light metals, metals, chloroform with acetone. Risk of explosion/exothermic reaction with nitrobenzene with methanol, bromine, calcium in powder form, furfuryl alcohol, nitromethane, peroxides, organic nitro compounds, nitriles, acrylic monomers, 3-pentylmagnesium bromide, nitrobenzene with salts.

no information available

Metals, light metals, nitriles, alkaline earth metals, ammonium compounds, cyanides, magnesium, organic nitro compounds, organic combustible substances, phenols, oxidisable substances, acetone, chlorine, ethylene oxide, fluorine, hydrogen halides, hydrazine hydrate, hydroxylamine, acid anhydrides, acrolein, acid chlorides, acids, sulphuric acid, chloroform, hydrogen peroxide, anhydrides, antimony trichloride, phosphides, halogen-halogen compounds, trichloroethene, (Methoxymethoxymethyl)tributyltin, organic substances, hydrogen sulphide, powdered aluminium, ammonium salts, persulfates, sodium borohydride, phosphorus, oxides of phosphorus, halogenated hydrocarbon, nitrobenzene, methanol, bromine, calcium (powder), furfuryl alcohol, nitromethane, peroxides, acrylic monomers, 3-pentylmagnesium bromide, salts.

Hydrogen