Sodium hydrogencarbonateSodium hydrogencarbonate

If breathed in, move person into fresh air. If not breathing, give artificial respiration.

Wash off with soap and plenty of water.

Flush eyes with water as a precaution.

Never give anything by mouth to an unconscious person. Rinse mouth with water.

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Carbon oxides, Sodium oxides

Avoid dust formation. Avoid breathing vapors, mist or gas.

No special environmental precautions required.

Sweep up and shovel.

Materials: suitable, closed containers

For precautions see section 2.2.

Keep container tightly closed in a dry and well-ventilated place. Store in cool place.

General industrial hygiene practice.

Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it. Full contact: Material: Nitrile rubber, Minimum layer thickness: 0,11 mm, Break through time: 480 min, Material tested: Dermatril® (KCL 740 / Aldrich Z677272, Size M). Splash contact: Material: Nitrile rubber, Minimum layer thickness: 0,11 mm, Break through time: 480 min, Material tested: Dermatril® (KCL 740 / Aldrich Z677272, Size M). data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail sales@kcl.de, test method: EN374. If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the EC approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.

Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place., The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.

No special environmental precautions required.

Stable under recommended storage conditions.

No data available

No data available

Exposure to moisture.

No data available

In the event of fire: see section 5