Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- WHITE SPIRIT
- Product Code
- 0623001F
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
solvent.
Manufacturers & Suppliers
FOREVER PRODUCTS N.V.
manufacturer
122 rue de la Glacerie, 6180, COURCELLES, Belgique
071/46.85.15
http://www.forever-products.be
Emergency Contacts
Antigifcentrum België, centre anti-poison
070 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| HYDROCARBONS, C9-C12, N-ALKANES, ISOALKANES, CYCLICS, AROMATICS (2-25%) EC: 919-446-0 | 64742-82-1 | 100% | Yes |
benzene content of <50 mg / kg (= ppm); aromatic content: 15-25%; Benzene content < 0.1% w/w.
First Aid Measures
Emergency procedures for chemical exposure incidents
To immediately move away the person from the polluted atmosphere and to call a doctor.
Symptoms: Irritating to respiratory tracts. Inhalation of vapors in high concentrations have a narcotic effect on the central nervous system.
Remove soaked clothing and cleanse skin with soap and water.
Symptoms: A prolonged or repeated contact may dry skin and cause irritation.
Wash with plenty of clean, fresh water for several minutes.
Do not ingest. Do not induce vomiting to avoid the risk of aspiration into the airways. Do not drink, do not induce vomiting and immediately transfer the person to a doctor, by showing the product label.
Symptoms: If swallowed, the product may be drawn into the lungs due to its low viscosity and cause inhalation pneumonia.
Immediate Medical Attention
If irritation persists, consult a Ophthalmology. If irritation appears or if the contamination is extensive and prolonged, consult a doctor. Immediately transfer the person to a doctor, by showing the product label.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
sprayed water or water mist, foam, carbon dioxide (CO2), powder dries
water jet
In the event of a fire, the following may be formed : carbon monoxide (CO), carbon dioxide (CO2)
Cool containers / holding tank with water spray.
Firefighter Protection
Because of the toxicity of gases emitted during the thermal decomposition products, the speakers will be equipped with autonomous insulating breathing protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Consult the safety measures listed under headings 7 and 8.
Prevent any material from entering drains or waterways.
To rinse the zone contaminated with water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in well-ventilated areas.
Keep container closed in a dry and well ventilated. Keep well away from all sources of ignition, heat and direct sunlight.
Keep well away from all sources of ignition, heat
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use suitable protective gloves that are resistant to chemical agents in accordance with standard EN ISO 374-1. Type of gloves recommended : - Nitrile rubber (butadiene-acrylonitrile copolymer rubber (NBR)) - PVA (Polyvinyl alcohol) - Viton® (Hexafluoropropylene copolymer and vinylidene fluoride) Thickness of the gloves Nitrile > 0.55mm. Penetration time> 480 min In case of contact through splashing: -Rubber nitrile: thickness of>0.38 mm and penetration time>60 minutes -Neoprene thickness of>0.75 mm and penetration time>60 minutes
Before handling, wear safety goggles in accordance with standard EN166.
When workers are confronted with concentrations that are above occupational exposure limits, they must wear a suitable, approved, respiratory protection device. Type of mask with combined filters : Wear a mask in accordance with standard EN136. Wear a half mask in accordance with standard EN140. Anti-gas and vapour filter(s) (Combined filters) in accordance with standard EN14387 : - A1 (Brown) - A3 (Brown) When workers are facing concentrations above the exposure limit they must use appropriate certified (cartridge filter).
Wear suitable protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This substance is stable under the recommended handling and storage conditions in section 7.
See the sections below.
No data available.
heating, heat, flames and hot surfaces, sparks
strong acids, oxidising agents
carbon monoxide (CO), carbon dioxide (CO2)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1300
- Shipping Name
- TURPENTINE SUBSTITUTE
- Transport Class
- 3
- Packing Group
- III
Category A
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for WHITE SPIRIT?
The signal word is danger.
What is the physical form of WHITE SPIRIT?
WHITE SPIRIT is a fluid liquid. with colorless color.
What is WHITE SPIRIT used for?
solvent.
What are the hazard statements for WHITE SPIRIT?
This substance has 5 hazard statements:
- H226: Flammable liquid and vapour.
- H304: May be fatal if swallowed and enters airways.
- H336: May cause drowsiness or dizziness.
- H372: Causes damage to organs through prolonged or repeated exposure (central nervous system) (if inhaled).
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of WHITE SPIRIT?
The melting point is Not specified. and the boiling point is Not specified..