Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ACETONE / ACETON
- Product Code
- 0601010F
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
solvent.
Manufacturers & Suppliers
FOREVER PRODUCTS N.V.
manufacturer
122 rue de la Glacerie, 6180, COURCELLES, Belgique
071/46.85.15
http://www.forever-products.be
Emergency Contacts
Antigifcentrum België, centre anti-poison
070 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| ACÉTONE EC: 200-662-2 | 67-64-1 | 98.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air
Remove soaked clothing and cleanse skin with soap and water.
Wash thoroughly with fresh, clean water for 15 minutes holding the eyelids open.
Keep the person exposed at rest. Do not force vomiting. Rinse mouth with water.
Immediate Medical Attention
If there is any redness, pain or visual impairment, consult an ophthalmologist. If irritation appears or if the contamination is extensive and prolonged, consult a doctor. Seek medical attention, showing the label.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
sprayed water or water mist, foam, multipurpose ABC powder, carbon dioxide (CO2)
water jet
pressurised containers may burst
Keep packages near the fire cool, to prevent pressurised containers from bursting.
Firefighter Protection
Fire-fighting personnel are to be equipped with autonomous insulating breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Consult the safety measures listed under headings 7 and 8.
Report spills to appropriate authorities in accordance with the regulations. Prevent entry into sewers or waterways.
Contain and collect leaks
Materials: non-combustible absorbent materials, eg sand, earth, vermiculite, diatomaceous earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in well-ventilated areas. Vapors are heavier than air. They can spread along the ground and form explosive mixtures with air.
Keep the container tightly closed in a dry, well-ventilated place. Keep well away from all sources of ignition, heat and direct sunlight.
Handle in well-ventilated areas. Vapors are heavier than air. They can spread along the ground and form explosive mixtures with air.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use suitable protective gloves that are resistant to chemical agents in accordance with standard EN ISO 374-1. Type of gloves recommended : Butyl Rubber (Isobutylene-isoprene copolymer)
Avoid contact with eyes. Wear safety goggles in case of projection.
If the ventilation is insufficient, wear appropriate breathing apparatus. Anti-gas and vapour filter(s) (Combined filters) in accordance with standard EN14387 : AX (Brown)
Wear suitable protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This substance is stable under the recommended handling and storage conditions in section 7.
See the sections below.
When exposed to high temperatures, the substance can release hazardous decomposition products, such as carbon monoxide and dioxide, fumes and nitrogen oxide.
high temperatures
strong reducing agents, halogen compounds, alkali metals, hydrogen peroxide, amines
carbon monoxide and dioxide, fumes and nitrogen oxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1090
- Shipping Name
- ACETONE
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ACETONE / ACETON?
The signal word is danger.
What is the physical form of ACETONE / ACETON?
ACETONE / ACETON is a fluid liquid. with colorless color.
What is ACETONE / ACETON used for?
solvent.
What are the hazard statements for ACETONE / ACETON?
This substance has 3 hazard statements:
- H225: Highly flammable liquid and vapour.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of ACETONE / ACETON?
The melting point is -94 °C. and the boiling point is >35°C.