NextSDS Logo
Safety Data Sheet EN

FRITZYM

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
FRITZYM
Product Form
Mixture
Product Code
POU0884

Regulatory Identifiers

CAS Number
N/A
UFI Code
5F4Y-W0XR-G00W-FDT6

Identified Uses

Professional use

Uses advised against

No additional information available

Manufacturers & Suppliers

REALCO S.A. logo

REALCO S.A.

manufacturer

Avenue Albert Einstein, 15, BE- B-1348 Louvain-la-Neuve, Belgium

+32 (0)10 45 30 00

http://www.realco.be

Emergency Contacts

Centre Anti-Poisons/Antigifcentrum c/o Hôpital Central de la Base - Reine Astrid

+32 70 245 245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2 H319

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation.
H319 Causes serious eye irritation.

Precautionary Statements

P280 Wear protective gloves, eye protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P337 + P313 If eye irritation persists: Get medical advice/attention.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
sodium carbonate EC: 207-838-8 497-19-8 30% Yes
disodium metasilicate EC: 229-912-9 6834-92-0 1 - 5% Yes
Lipase EC: 232-619-9 9001-62-1 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove victim to fresh air. Allow the victim to rest.

Symptoms: Cough. May cause respiratory irritation.

Skin contact

Remove contaminated clothing and shoes. Wash with plenty of water/...

Symptoms: Contact during a long period may cause light irritation.

Eye contact

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Symptoms: Redness, pain.

Ingestion

Rinse mouth. Never give anything by mouth to an unconscious person.

Symptoms: Ingestion may cause nausea, vomiting and diarrhea.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray. Foam.

Unsuitable media

Do not use a heavy water stream.

Specific hazards

Fire hazard: None under normal conditions.

Instructions

Fight fire remotely due to the risk of explosion.

Firefighter Protection

Do not enter fire area without proper protective equipment, including respiratory protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Mark the danger area. Stop leak if safe to do so. Do not breathe dust. Avoid all contact with skin, eyes, or clothing. Evacuate area.

Environmental

Avoid release to the environment.

Cleanup methods

Sweep or vacuum the product to recover it.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid raising dust. Avoid contact with skin and eyes. Use personal protective equipment as required. Do not eat, drink or smoke when using this product.

Storage

Store tightly closed in a dry and cool place. Keep only in the original container. Protect from moisture.

Hygiene

Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Wash contaminated clothing before reuse.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure adequate ventilation.

Hands

In case of repeated or prolonged contact wear gloves. EN 374

Eyes

None necessary. Avoid contact with eyes

Respiratory

Approved dust or mist respirator should be used if airborne particles are generated when handling this material.

Skin/Body

No special clothing/skin protection equipment is recommended under normal conditions of use

Environmental

Prevent entry to sewers and public waters. Avoid release to the environment.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Form
---
Dynamic Viscosity
Not applicable
Upper Explosive Limit
Not applicable
Physical State Data
solid
Molecular Weight
---
Kinematic Viscosity
Not applicable
State Under Standard Conditions
---
Relative Density
The product has not been tested
Freezing Point
Not applicable
Properties Status
---
Appearance
Powder.
Vapor Density
---
Ph
Not applicable
Colour Intensity
---
Explosive Limits
---
Physical State
Solid
Solubility
Material highly soluble in water.
Flash Point
Not applicable
Metal Corrosion
---
Density
---
Cloud Point
---
Odor
Odourless or almost odourless.
Melting Point
Not tested
Boiling Point
Not applicable
Solidification Point
---
Softening Point
---
Decomposition Temperature
Not applicable
Vapor Pressure
The product has not been tested
Evaporation Rate
---
Lower Explosive Limit
Not applicable
Voc Content
---
Colour
white.
Partition Coefficient
The product has not been tested
Bulk Density
---
Solubility In Water
---
Auto Ignition Temperature
Not applicable
Solubility In Fat
---
Odor Threshold
The product has not been tested
Flammability
The product is not flammable.
Relative Evaporation Rate
Not applicable
Crystallisation Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable in use and storage conditions as recommended in item 7.

Reactivity

Stable in use and storage conditions as recommended in item 7.

Hazardous reactions

None under normal conditions.

Avoid

Moisture.

Incompatible

No additional information available

Decomposition

In the event of fire, may decompose : Carbon oxides (CO, CO2).

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for FRITZYM?

The signal word is warning.

What is the physical form of FRITZYM?

FRITZYM is a solid appearing as powder. with white. color. It has odourless or almost odourless. odor.

What is the solubility of FRITZYM?

Material highly soluble in water.

What is FRITZYM used for?

Professional use

What are the hazard statements for FRITZYM?

This substance has 2 hazard statements:

  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.

What is the melting point of FRITZYM?

The melting point is Not tested and the boiling point is Not applicable.