PERCARBONATE DE SOUDE/NATRIUMPERCARBONAAT/NATRIUMPERCARBONAT

Remove to fresh air. To consult a doctor by showing him the label of the product.

Watch out for any remaining product between skin and clothing, watches, shoes, etc. Remove soaked clothing and cleanse skin with soap and water. If irritation appears or if the contamination is extensive and prolonged, consult a doctor.

Wash thoroughly with fresh, clean water for 15 minutes holding the eyelids open. Consult an ophthalmologist if irritation persists.

Do not induce vomiting. Rinse mouth with water. To call upon a doctor immediately.

water jet

foam, carbon dioxide (CO2)

Do not breathe fumes.

Use extinguishing measures appropriate to local circumstances and the surrounding environment.

Consult the safety measures listed under headings 7 and 8.

Like all solid pick.

Prevent any material from entering drains or waterways.

Wash with water.

Materials: inert absorbent material (sand, kieselguhr, ...)

Always wash hands after handling. Remove and wash contaminated clothing before re-using. Handle in well-ventilated areas. Avoid raising dust.

Keep the container tightly closed in a dry, well-ventilated place.

Always wash hands after handling. Remove and wash contaminated clothing before re-using. No smoking, eating or drinking in areas where the substance is used.

Keep away from combustible material.

Ensure that there is adequate ventilation, especially in confined areas.

Use suitable protective gloves that are resistant to chemical agents in accordance with standard EN ISO 374-1. Gloves must be selected according to the application and duration of use at the workstation. Protective gloves need to be selected according to their suitability for the workstation in question: other chemical products that may be handled, necessary physical protections (cutting, pricking, heat protection), level of dexterity required. Type of gloves recommended : Nitrile rubber (butadiene-acrylonitrile copolymer rubber (NBR))

Avoid contact with eyes. Before handling powders or dust emission, wear mask goggles in accordance with standard EN166. Wear goggles tight.

Avoid inhaling dust. When workers are confronted with concentrations that are above occupational exposure limits, they must wear a suitable, approved, respiratory protection device. Type of FFP mask : Wear a disposable half-mask dust filter in accordance with standard EN149/A1. Category : FFP1. Anti-gas and vapour filter(s) (Combined filters) in accordance with standard EN14387 : A1 (Brown). Particle filter according to standard EN143 : P2 (White).

After contact with the product, all parts of the body that have been soiled must be washed. Wear suitable protective clothing

This substance is stable under the recommended handling and storage conditions in section 7.

See the sections below.

Reacts violently with water. Formation of mixtures of hydrogen and air explosive if stored in closed rooms.

heating, heat, formation of dusts, humidity. Dusts can form an explosive mixture with air.

reducing agents

carbon monoxide (CO), carbon dioxide (CO2)