Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sodium hydrogen carbonate AnalaR NORMAPUR® Reag. Ph.Eur.
- Product Code
- 27778
- Chemical Name
- Sodium hydrogen carbonate
- Synonyms
- Sodium bicarbonate
Regulatory Identifiers
- CAS Number
- 144-55-8 Check regulations →
- REACH No.
- 01-2119457606-32-XXXX
Identified Uses
General chemical reagent
Uses advised against
The product, as such or as a component of a mixture, is not intended to be used by consumers (as defined by the REACH Regulation).
Manufacturers & Suppliers
VWR International Ltd.
national supplier
Hunter Boulevard, Magna Park, Lutterworth, LE17 4XN, UK
0800 22 33 44
Emergency Contacts
CareChem24
+44 (0) 1270 502894
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Substance name: Sodium hydrogen carbonate Molecular formula: NaHCO₃ Molecular weight: 84.01 g/mol CAS No.: 144-55-8 EU REACH registration No.: 01-2119457606-32-XXXX EC No.: 205-633-8 ATE, SCL and/or M-factor: none
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium hydrogen carbonate EC: 205-633-8 | 144-55-8 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest. Obtain medical attention if symptoms appear.
Gently wash with plenty of soap and water. In case of skin reactions, consult a physician.
Rinse immediately carefully and thoroughly with eye-bath or water. Obtain medical attention if symptoms appear.
Rinse mouth thoroughly with water. Call a doctor if you feel unwell.
Medical Treatment
No special information on medical attention and special treatment available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
ABC-powder, Carbon dioxide (CO2), Dry sand, Nitrogen
Full water jet
Non-combustible solids. The product itself does not burn. Fire may produce irritating, corrosive and/or toxic gases.
Co-ordinate fire-fighting measures to the fire surroundings. In case of fire and/or explosion do not breathe fumes. In case of fire: Evacuate area.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not breathe dust. Remove victim out of the danger area. Remove victim to fresh air and keep at rest in a position comfortable for breathing.
No special environmental measures are necessary.
Take up mechanically, placing in appropriate containers for disposal. Rinse affected areas with water.
Related Products
Similar products with comparable safety profiles
Sodium carbonate AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent
CAS: 497-19-8
Sodium hydroxide AnalaR NORMAPUR® pellets Reag. Ph. Eur.
CAS: 1310-73-2
Sodium hydroxide AnalaR NORMAPUR® pellets Reag. Ph. Eur.
CAS: 1310-73-2
Sodium carbonate decahydrate AnalaR NORMAPUR® analytical reagent
CAS: 6132-02-1
Potassium Hydrogen Carbonate AnalaR NORMAPUR® Analytical Reagent
CAS: 298-14-6
di-Sodium hydrogen phosphate, anhydrous AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent
CAS: 7558-79-4
Ammonium acetate AnalaR NORMAPUR® Reag. Ph.Eur., ACS
CAS: 631-61-8
Sodium sulphate, anhydrous AnalaR NORMAPUR® Reag. Ph. Eur. analytical reagent
CAS: 7757-82-6
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash hands before breaks and after work. Avoid contact with eyes and skin. When using do not eat, drink or smoke. Provide eye shower and label its location conspicuously.
Store in a dry place. Store in a closed container. Keep the packing dry and well sealed to prevent contamination and absorbtion of humidity. Keep away from heat.
Wash hands before breaks and after work. Avoid contact with eyes and skin. When using do not eat, drink or smoke. Provide eye shower and label its location conspicuously.
No special measures are necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.
When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms EN ISO 374 In the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact Suitable material: NBR (Nitrile rubber) Thickness of the glove material: 0,12 mm Breakthrough time: > 480 min Recommended glove articles: VWR 112-0998
Eye glasses with side protection DIN-/EN-Norms EN 166 Recommendation: VWR 111-0432
Usually no personal respirative protection necessary. Suitable respiratory protection apparatus: no data available Recommendation: no data available Suitable material: no data available Recommendation: no data available
Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.
no data available
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
This material is non-reactive under normal conditions.
Reaction with: Acids.
Keep away from heat.
No further relevant information available.
Decomposition products in case of fire: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Sodium hydrogen carbonate AnalaR NORMAPUR® Reag. Ph.Eur. known by?
Sodium hydrogen carbonate AnalaR NORMAPUR® Reag. Ph.Eur. is also known as: Sodium bicarbonate
What is the hazard signal word for Sodium hydrogen carbonate AnalaR NORMAPUR® Reag. Ph.Eur.?
The signal word is no signal word.
What is the physical form of Sodium hydrogen carbonate AnalaR NORMAPUR® Reag. Ph.Eur.?
Sodium hydrogen carbonate AnalaR NORMAPUR® Reag. Ph.Eur. is a solid with white color. It has no data available odor.
What is Sodium hydrogen carbonate AnalaR NORMAPUR® Reag. Ph.Eur. used for?
General chemical reagent
What is the melting point of Sodium hydrogen carbonate AnalaR NORMAPUR® Reag. Ph.Eur.?
The melting point is 270 °C and the boiling point is 400 °C (1013 hPa).