Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SILBO Silver Bath
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaning agent
Uses advised against
None known.
Manufacturers & Suppliers
Delu Ako Minky GmbH
manufacturer
Hauptstraße 103, 53619 Rheinbreitbach, GERMANY
(+49) 02224-1800-0
http://www.silbo.de
Emergency Contacts
Advisory body
+49 (0) 551-19240
24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Propan-2-ol EC: 200-661-7 | 67-63-0 | 1 - 5% | Yes |
| Fattyalcohol polyglycolether, C10-14 (6EO) | 69227-22-1 | 1 - 3% | Yes |
| Hydrochloric acid EC: 231-595-7 | 7647-01-0 | 1 - 5% | Yes |
| Thiourea EC: 200-543-5 | 62-56-6 | 0.1 - 1% | Yes |
Substances of Very High Concern - SVHC: substances are not contained or are below 0,1%.
First Aid Measures
Emergency procedures for chemical exposure incidents
Ensure supply of fresh air.
In case of contact with skin wash off with warm water.
Symptoms: Skin irritation
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Symptoms: Eye irritation
Do not induce vomiting. Rinse out mouth and give plenty of water to drink.
Symptoms: If swallowed or in the event of vomiting, risk of product entering the lungs.
Immediate Medical Attention
Consult a doctor if skin irritation persists. If eye irritation persists: Get medical advice/attention. Supply with medical care.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry powder, water spray jet, carbon dioxide.
Full water jet.
Risk of formation of toxic pyrolysis products.
Firefighter Protection
Use self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. High risk of slipping due to leakage/spillage of product.
Prevent spread over a wide area (e.g. by containment or oil barriers).
Pick up with absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only in well-ventilated areas. Do not eat, drink or smoke when using this product. Wash hands before breaks and after work. Use barrier skin cream. Contaminated work clothing should not be allowed out of the workplace. Take off contaminated clothing and wash before reuse.
Keep container tightly closed. Keep container in a well-ventilated place. Protect from heat/overheating.
Do not eat, drink or smoke when using this product. Wash hands before breaks and after work. Use barrier skin cream. Contaminated work clothing should not be allowed out of the workplace. Take off contaminated clothing and wash before reuse.
Protect from heat/overheating.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
not applicable
The details concerned are recommendations. Please contact the glove supplier for further information. In full contact: Butyl rubber, >480 min (EN 374). In splash contact Butyl rubber, >120 min (EN 374).
Safety glasses.
not applicable
Not required under normal conditions.
See SECTION 6+7.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal ambient conditions (ambient temperature).
No dangerous reactions known if used as directed.
Reactions with alkalies (lyes). Reactions with strong oxidizing agents.
Strong heating.
See SECTION 10.3.
No hazardous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SILBO Silver Bath?
The signal word is danger.
What is the physical form of SILBO Silver Bath?
SILBO Silver Bath is a liquid with colourless color. It has characteristic odor.
What is SILBO Silver Bath used for?
Cleaning agent
What are the hazard statements for SILBO Silver Bath?
This substance has 2 hazard statements:
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
What is the melting point of SILBO Silver Bath?
The melting point is not determined and the boiling point is 100 °C.