ANTI GRAFFITI C3 500MLX6 QUICK TECH

In the event of massive inhalation, remove the person exposed to fresh air. Keep warm and at rest. If the person is unconscious, place in recovery position. Notify a doctor in all events, to ascertain whether observation and supportive hospital care will be necessary. If breathing is irregular or has stopped, effect mouth-to-mouth resuscitation and call a doctor. In the event of an allergic reaction, seek medical attention.

Remove contaminated clothing and wash the skin thoroughly with soap and water or a recognised cleaner. Watch out for any remaining product between skin and clothing, watches, shoes, etc. In the event of an allergic reaction, seek medical attention. If the contaminated area is widespread and/or there is damage to the skin, a doctor must be consulted or the patient transferred to hospital.

Wash thoroughly with fresh, clean water for 15 minutes holding the eyelids open.

In the event of swallowing, if the quantity is small (no more than one mouthful), rinse the mouth with water and consult a doctor. Keep the person exposed at rest. Do not force vomiting. Seek medical attention, showing the label. If swallowed accidentally, call a doctor to ascertain whether observation and hospital care will be necessary. Show the label.

sprayed water or water mist, water with AFFF (Aqueous Film Forming Foam) additive, halon, foam, multipurpose ABC powder, BC powder, carbon dioxide (CO2)

water jet

A fire will often produce a thick black smoke. Exposure to decomposition products may be hazardous to health.

Keep packages near the fire cool, to prevent pressurised containers from bursting.

Eliminate sources of ignition, ventilate the area, avoid inhaling vapors, avoid contact with skin and eyes. If a large quantity has been spilt, evacuate all personnel and only allow intervention by trained operators equipped with safety apparatus.

If a large quantity has been spilt, evacuate all personnel and only allow intervention by trained operators equipped with safety apparatus.

Contain and control the leaks or spills with non-combustible absorbent materials such as sand, earth, vermiculite, diatomaceous earth in drums for waste disposal. Prevent any material from entering drains or waterways.

Clean preferably with a detergent, do not use solvents.

Always wash hands after handling. Remove and wash contaminated clothing before re-using. Do not breathe in aerosols. Avoid inhaling vapors. No smoking, eating or drinking in areas where the mixture is used.

Keep packages tightly closed and away from sources of heat, sparks and naked flames. Packages which have been opened must be reclosed carefully and stored in an upright position.

Always wash hands after handling. Remove and wash contaminated clothing before re-using. No smoking, eating or drinking in areas where the mixture is used.

Handle in well-ventilated areas. Vapours are heavier than air. Prevent the formation of flammable or explosive concentrations in air and avoid vapor concentrations higher than the occupational exposure limits. Do not spray on a naked flame or any incandescent material. Do not pierce or burn, even after use. Keep packages tightly closed and away from sources of heat, sparks and naked flames. Do not use tools which may produce sparks. Do not smoke.

Ensure that there is adequate ventilation, especially in confined areas.

Use suitable protective gloves that are resistant to chemical agents in accordance with standard EN ISO 374-1. Gloves must be selected according to the application and duration of use at the workstation. Protective gloves need to be selected according to their suitability for the workstation in question : other chemical products that may be handled, necessary physical protections (cutting, pricking, heat protection), level of dexterity required. Type of gloves recommended : Nitrile rubber (butadiene-acrylonitrile copolymer rubber (NBR)), PVA (Polyvinyl alcohol). Let the glove manufacturer advise you on the choice of gloves and their duration of use for your operating conditions

Avoid contact with eyes. Use eye protectors designed to protect against liquid splashes. Before handling, wear safety goggles in accordance with standard ISO 16321.

Avoid inhaling vapors. If the ventilation is insufficient, wear appropriate breathing apparatus. When workers are confronted with concentrations that are above occupational exposure limits, they must wear a suitable, approved, respiratory protection device. Type of FFP mask : Wear a disposable half-mask aerosol filter in accordance with standard EN149/A1. Category : FFP1. Anti-gas and vapour filter(s) (Combined filters) in accordance with standard EN14387 : A1 (Brown). Particle filter according to standard EN143 : P1 (White). Types, classes and filters for respiratory protection above are recommended in case of confrontation at concentrations higher than the exposure limits specified under 8.1. (Control parameters) .They should be adjusted according to actual conditions. they may not be necessary if the product is used outdoors or in a well ventilated area.

Avoid skin contact. Wear suitable protective clothing. Suitable type of protective clothing : In the event of substantial spatter, wear liquid-tight protective clothing against chemical risks (type 3) in accordance with EN14605/A1 to prevent skin contact. In the event of a risk of splashing, wear protective clothing against chemical risks (type 6) in accordance with EN13034/A1 to prevent skin contact. Work clothing worn by personnel shall be laundered regularly.

This mixture is stable under the recommended handling and storage conditions in section 7.

No data available.

When exposed to high temperatures, the mixture can release hazardous decomposition products, such as carbon monoxide and dioxide, fumes and nitrogen oxide.

Any apparatus likely to produce a flame or to have a metallic surface at high temperature (burners, electric arcs, furnaces etc.) must not be allowed on the premises. Avoid : heating, heat

No incompatible materials known.

carbon monoxide and dioxide, fumes and nitrogen oxide

Stowage: SW1 SW22; Segregation: SG69