NextSDS Logo
Safety Data Sheet EN

PressurePro Oil and Grease Cleaner Extra RM 31

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
PressurePro Oil and Grease Cleaner Extra RM 31

Regulatory Identifiers

CAS Number
N/A
UFI Code
T140-Y06R-P009-WVV2

Identified Uses

Detergent

Uses advised against

No further relevant information available.

Manufacturers & Suppliers

Alfred Kärcher SE & Co. KG logo

Alfred Kärcher SE & Co. KG

manufacturer

Alfred-Kärcher-Str. 28-40, D - 71364 Winnenden

+49-7195-14-0

http://www.karcher.com

Emergency Contacts

CHEMTREC

1-800-424-9300

CHEMTREC

+1 703-741-5970

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Met. Corr. Cat. 1 H290
Skin Corr. Cat. 1A H314
Eye Dam. Cat. 1 H318

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H290 May be corrosive to metals.
H314 Causes severe skin burns and eye damage.

Precautionary Statements

P280 Wear protective gloves/protective clothing/eye protection/face protection.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER/doctor.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Cleaning agent

Chemical Name CAS Number Concentration Hazardous
sodium hydroxide EC: 215-185-5 1310-73-2 5 - 10% Yes
polycarboxylates, anionic surfactants --- 5% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

In case of unconsciousness place patient stably in side position for transportation. Supply fresh air; consult doctor in case of complaints.

Skin contact

Seek medical treatment. Immediately wash with water and soap and rinse thoroughly. Immediately rinse with water.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Symptoms: Corneal damage

Ingestion

Rinse out mouth and then drink plenty of water. Do not induce vomiting; call for medical help immediately. Drink plenty of water and provide fresh air. Call for a doctor immediately.

Immediate Medical Attention

Involve doctor immediately. Seek medical treatment. Call for medical help immediately. Call for a doctor immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

Unsuitable media

Water with full jet.

Specific hazards

No further relevant information available.

Firefighter Protection

Wear fully protective suit.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Wear protective equipment. Keep unprotected persons away.

Environmental

Dilute with plenty of water.

Cleanup methods

Absorb with liquid-binding material

Materials: sand, diatomite, acid binders, universal binders

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes and skin.

Storage

Store only in the original receptacle. Keep receptacle tightly sealed.

Fire prevention

No special measures required.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

The data for this section has not been processed yet.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Fluid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Fluid, Yellow
Colour
Yellow
Colour Intensity
---
Form
Fluid
Odor
Product specific
Odor Threshold
Not determined.
Ph
13.5
Melting Point
-14 °C
Boiling Point
100 °C
Flash Point
Not applicable
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not determined.
Vapor Pressure
Not determined.
Vapor Density
Not determined.
Relative Density
Not determined.
Bulk Density
---
Density
1.14 g/cm³
Flammability
Not applicable.
Upper Explosive Limit
Not determined.
Lower Explosive Limit
Not determined.
Explosive Limits
---
Auto Ignition Temperature
Product is not selfigniting.
Decomposition Temperature
Not determined.
Solubility
---
Partition Coefficient
Not determined.
Solubility In Water
Fully miscible
Solubility In Fat
---
Molecular Weight
---
Voc Content
0.00 %
Metal Corrosion
---
Dynamic Viscosity
5 mPas
Kinematic Viscosity
Not determined.
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No decomposition if used according to specifications.

Hazardous reactions

Reacts with strong acids. Strong exothermic reaction with acids. Reacts with light alloys to form hydrogen. Corrodes aluminium.

Avoid

No further relevant information available.

Incompatible

Not compatible with alkali-sensitive substances like Sn, Zn, Al and paintings.

Decomposition

No dangerous decomposition products known

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1824
Shipping Name
SODIUM HYDROXIDE SOLUTION mixture
Transport Class
8
Packing Group
II
ADR

Warning: Corrosive substances.

IMDG

Stowage Category A, Segregation Code SG35

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for PressurePro Oil and Grease Cleaner Extra RM 31?

The signal word is danger.

What is the physical form of PressurePro Oil and Grease Cleaner Extra RM 31?

PressurePro Oil and Grease Cleaner Extra RM 31 is a fluid appearing as fluid, yellow with yellow color. It has product specific odor.

What is PressurePro Oil and Grease Cleaner Extra RM 31 used for?

Detergent

What are the hazard statements for PressurePro Oil and Grease Cleaner Extra RM 31?

This substance has 2 hazard statements:

  • H290: May be corrosive to metals.
  • H314: Causes severe skin burns and eye damage.

What is the melting point of PressurePro Oil and Grease Cleaner Extra RM 31?

The melting point is -14 °C and the boiling point is 100 °C.