DESODORISANT CITRON VERT 750ML PUCK

In case of massive inhalation transport the patient outdoors and keep him for the warmth and for the rest.

Lave bem a pele com água.

Wash thoroughly with fresh, clean water for 15 minutes holding the eyelids open.

In the event of swallowing, if the quantity is small (no more than one mouthful), rinse the mouth with water. Keep the person exposed at rest.

sprayed water or water mist, water with AFFF (Aqueous Film Forming Foam) additive, foam, multipurpose ABC powder, BC powder, carbon dioxide (CO2), halon

water jet

A fire will often produce a thick black smoke. Exposure to decomposition products may be hazardous to health.

Keep packages near the fire cool, to prevent pressurised containers from bursting.

For non first aid worker: Because of the organic solvents contained in the mixture, eliminate sources of ignition and ventilate the area. For first aid worker: First aid workers will be equipped with suitable personal protective equipment (See section 8).

Contain and control the leaks or spills with non-combustible absorbent materials such as sand, earth, vermiculite, diatomaceous earth in drums for waste disposal. Prevent any material from entering drains or waterways.

Clean preferably with a detergent, do not use solvents.

Materials: detergent

Always wash hands after handling. Ensure that there is adequate ventilation, especially in confined areas. Do not breathe in aerosols. Observe precautions stated on label and also industrial safety regulations.

Packages which have been opened must be reclosed carefully and stored in an upright position.

Always wash hands after handling. No smoking, eating or drinking in areas where the mixture is used.

Handle in well-ventilated areas. Vapours are heavier than air. They can spread along the ground and form mixtures that are explosive with air. Prevent the formation of flammable or explosive concentrations in air and avoid vapor concentrations higher than the occupational exposure limits. Do not spray on a naked flame or any incandescent material. Do not pierce or burn, even after use. Keep packages tightly closed and away from sources of heat, sparks and naked flames. Do not use tools which may produce sparks. Do not smoke.

Ensure that there is adequate ventilation, especially in confined areas.

Wear suitable protective gloves in the event of prolonged or repeated skin contact. Type of gloves recommended : - Nitrile rubber (butadiene-acrylonitrile copolymer rubber (NBR)) - PVA (Polyvinyl alcohol) Let the glove manufacturer advise you on the choice of gloves and their duration of use for your operating conditions

Avoid contact with eyes. Use eye protectors designed to protect against liquid splashes Before handling, wear safety goggles in accordance with standard ISO 16321.

Category : - FFP1 Anti-gas and vapour filter(s) (Combined filters) in accordance with standard EN14387 : - AX Particle filter according to standard EN143 : - P1 Types, classes and filters for respiratory protection above are recommended in case of confrontation at concentrations higher than the exposure limits specified under 8.1. (Control parameters) .They should be adjusted according to actual conditions. they may not be necessary if the product is used outdoors or in a well ventilated area.

Work clothing worn by personnel shall be laundered regularly. After contact with the product, all parts of the body that have been soiled must be washed.

This mixture is stable under the recommended handling and storage conditions in section 7.

No data available.

When exposed to high temperatures, the mixture can release hazardous decomposition products

high temperatures

No data available.

carbon monoxide and dioxide, fumes and nitrogen oxide

Stowage: SW1 SW22; Segregation: SG69