Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 4003130 LYRECO RINSE AID
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- VJ5M-UD2T-E30U-0QMG
Identified Uses
/
Manufacturers & Suppliers
Lyreco France
distributor
Rue du 19 Mars 1962, 59770 Marly, France
+33327236400
http://www.lyreco.com/
Emergency Contacts
Emergency Contact
+31 70 345 87 37
Emergency Contact
+353 1 809 2166
Nationaal Vergiftigingen Informatie Centrum (NVIC)
+31 88 755 8000
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethanol EC: 200-578-6 | 64-17-5 | 5% | Yes |
| Citric Acid EC: 201-069-1 | 77-92-9 | 3% | Yes |
| C8-10 D-glucoside EC: 500-220-1 | 68515-73-1 | 2% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of serious or continuous discomforts: remove to fresh air and seek medical attention.
Rinse with water.
Rinse first with plenty of water, if necessary seek medical attention.
Symptoms: Redness
Rinse first with plenty of water, if necessary seek medical attention.
Symptoms: Diarrhoea, headache, abdominal cramps, sleepiness, vomiting
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, foam, powder, sprayed water
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not walk into or touch spilled substances and avoid inhalation of fumes, smoke, dusts and vapours by staying up wind.
Do not allow to flow into sewers or open water.
remove by using absorbent material
Materials: absorbent material
Related Products
Similar products with comparable safety profiles
283419 Crystal Rinse
UFI: Q6H9-J3UK-H30K-U5AJ
4002864 Wash Liquid
UFI: 8RWK-VHKX-AC0H-DUWH
Aquence 3416A RXN RINSE BULK
---
5999914 4002773 Lyreco Window Cleaner Spray
---
4002893 Crystal Rinse BiB
UFI: T6H9-J3UN-4302-U67P
Rinse aid
UFI: 5XS0-6NC2-980R-2S8A
Rinse aid
---
4002894 Crystal Rinse Soft BiB
UFI: FSEX-02XP-D301-WNEG
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle with care to avoid spillage.
Keep in a sealed container in a closed, frost-free, ventilated room.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The level of protection and types of controls necessary will vary depending upon potential exposure conditions. Adequate ventilation should be provided so that exposure limits are not exceeded. For further information, check section 7.
Handling with nitril-gloves (EN 374). Breakthrough time: >480' Material thickness: 0,35 mm. Thoroughly check gloves before use. Take of the gloves properly without touching the outside with your bare hands. The manufacturer of the protective gloves has to be consulted about the suitability for a specific work station. Wash and dry your hands.
Keep an eye-rinse bottle within reach. Tight-fitting safety goggles. Wear a face shield and protective suit in case of exceptional processing problems.
Respiratory protection is not required. Use ABEK type gas masks in case of irritating exposure. If necessary, use with sufficient exhaust ventilation.
Wear impermeable clothing. The type of protective equipment depends on the concentration and amount of hazardous substances at the work station in question.
Comply with applicable environmental regulations limiting discharge to air, water and soil. Protect the environment by applying appropriate control measures to prevent or limit emissions. For further information, check sections 6 and 13.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Extremely high or low temperatures.
Stable under normal conditions.
Protect from sunlight and do not expose to temperatures exceeding + 50°C.
Under recommended usage conditions, hazardous decomposition products are not expected.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 4003130 LYRECO RINSE AID?
The signal word is warning.
What is the physical form of 4003130 LYRECO RINSE AID?
4003130 LYRECO RINSE AID is a liquid with colourless color. It has characteristic odor.
What is 4003130 LYRECO RINSE AID used for?
/
What are the hazard statements for 4003130 LYRECO RINSE AID?
This substance has 1 hazard statement:
- H319: Causes serious eye irritation.
What is the melting point of 4003130 LYRECO RINSE AID?
The melting point is 0 °C and the boiling point is 78 °C – 82 °C.