NextSDS Logo
Safety Data Sheet EN

Aquence 3416A RXN RINSE BULK

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Aquence 3416A RXN RINSE BULK
Product Code
1307749

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Dam. Cat. 1 H318

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H318 CAUSES SERIOUS EYE DAMAGE.

Precautionary Statements

P280 Wear eye and face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Ethoxylated alcohol 68131-39-5 5 - 10% Yes
Ammonium hydroxide 1336-21-6 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, immediately remove the affected person to fresh air.

Skin contact

Immediately flush skin with plenty of water (using soap, if available).

Eye contact

In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes.

Ingestion

DO NOT induce vomiting unless directed to do so by medical personnel.

Immediate Medical Attention

Seek medical attention from a specialist.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use media appropriate for surrounding material.

Unsuitable media

Not available.

Specific hazards

This product is an aqueous mixture which will not burn.

Instructions

Wear self-contained breathing apparatus. Wear full protective clothing.

Firefighter Protection

Wear self-contained breathing apparatus. Wear full protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage. Wear appropriate personal protective equipment. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Use only in well-ventilated areas. For industrial use only. Do not breathe gas/fumes/vapor/spray.

Storage

Store between 5 °C (41°F) and 38 °C (100.4 °F). Protect from freezing.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ventilation should effectively remove and prevent buildup of any vapor/mist/fume/dust generated from the handling of this product.

Hands

Wear impervious gloves for prolonged contact.

Eyes

Safety goggles or safety glasses with side shields.

Respiratory

If ventilation is not sufficient to effectively prevent buildup of aerosols, mists or vapors, appropriate NIOSH/MSHA respiratory protection must be provided.

Skin/Body

Use of impervious apron and boots are recommended.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Vapor Density
---
Explosive Limits
---
State Under Standard Conditions
---
Solubility
Complete
Kinematic Viscosity
Not available.
Molecular Weight
---
Colour
Colourless / Colorless
Boiling Point
> 98 °C (> 208.4 °F)calculated
Physical State Data
liquid
Colour Intensity
---
Evaporation Rate
---
Appearance
---
Solidification Point
---
Lower Explosive Limit
Not applicable
Bulk Density
---
Dynamic Viscosity
Not available.
Form
---
Upper Explosive Limit
Not applicable
Solubility In Fat
---
Density
---
Odor Threshold
Not available.
Freezing Point
---
Partition Coefficient
Not available.
Auto Ignition Temperature
Not applicable
Physical State
Liquid
Vapor Pressure
Not available.
Properties Status
---
Ph
8 - 9.5
Relative Density
1.022 - 1.029 at 15.56 °C (60.01 °F)
Decomposition Temperature
Not available.
Melting Point
Not available.
Metal Corrosion
---
Flammability
Not applicable
Crystallisation Point
---
Cloud Point
---
Relative Evaporation Rate
---
Softening Point
---
Voc Content
Not available.
Flash Point
Not applicable
Odor
Ammoniacal
Solubility In Water
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

This product may react with strong acids, bases and oxidizing agents.

Decomposition

Oxides of carbon. Oxides of nitrogen.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Aquence 3416A RXN RINSE BULK?

The signal word is danger.

What is the physical form of Aquence 3416A RXN RINSE BULK?

Aquence 3416A RXN RINSE BULK is a liquid with colourless / colorless color. It has ammoniacal odor.

What is the solubility of Aquence 3416A RXN RINSE BULK?

Complete

What are the hazard statements for Aquence 3416A RXN RINSE BULK?

This substance has 1 hazard statement:

  • H318: CAUSES SERIOUS EYE DAMAGE.

What is the melting point of Aquence 3416A RXN RINSE BULK?

The melting point is Not available. and the boiling point is > 98 °C (> 208.4 °F)calculated.