Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- THINNER SYNTHETIQUE / SYNTHETISCHE THINNER/SYNTHETISCHER VERDUNNER
- Product Code
- 062000600
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Thinner for synthetic paints
Manufacturers & Suppliers
FOREVER PRODUCTS N.V.
manufacturer
122 rue de la Glacerie, 6180, COURCELLES, Belgique
071/46.85.15
http://www.forever-products.be
Emergency Contacts
Antigifcentrum België, centre anti-poison
070 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| TOLUENE EC: 203-625-9 | 108-88-3 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
To immediately move away the person from the polluted atmosphere and to call a doctor.
Symptoms: Inhalation of vapors in high concentrations have a narcotic effect on the central nervous system.
Remove soaked clothing and cleanse skin with soap and water.
Symptoms: irritation
Wash with plenty of clean, fresh water for several minutes.
Symptoms: irritation
Seek medical attention immediately, showing the label.
Symptoms: If swallowed, followed by vomiting, the product can enter the lungs.
Immediate Medical Attention
If irritation persists, consult a Ophthalmology. If irritation appears or if the contamination is extensive and prolonged, consult a doctor. Seek medical attention immediately, showing the label.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
foam, carbon dioxide (CO2), powder dries
water jet
pressurised containers from bursting
Keep packages near the fire cool, to prevent pressurised containers from bursting.
Firefighter Protection
To wear clothing and equipment of fireproofed firemen.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Consult the safety measures listed under headings 7 and 8.
Prevent any material from entering drains or waterways.
Related Products
Similar products with comparable safety profiles
THINNER SYNTHETIQUE / SYNTHETISCHE THINNER/SYNTHETISCHER VERDUNNER
---
ALEXIT-Verdünner / Thinner S 66
---
THINNER N° 2
---
THINNER 2
---
Thinner cellulosique (acétone) / Cellulose thinner (aceton)
UFI: 8WG1-9PDF-DR5V-SSCA
THINNER N° 25
---
THINNER CELLULOSIC 509
---
International Thinner
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent access by unauthorised personnel.
Keep the container tightly closed in a cool, well ventilated place
No smoking, eating or drinking in areas where the substance is used.
Handle in well-ventilated areas.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use suitable protective gloves that are resistant to chemical agents in accordance with standard EN ISO 374-1. Type of gloves recommended : PVA (Polyvinyl alcohol), Viton® (Hexafluoropropylene copolymer and vinylidene fluoride), PE (Polyethylene)
Avoid contact with eyes. Before handling, wear safety goggles in accordance with standard EN166. Wear safety glasses with side shields.
When workers are confronted with concentrations that are above occupational exposure limits, they must wear a suitable, approved, respiratory protection device. Anti-gas and vapour filter(s) (Combined filters) in accordance with standard EN14387 : A1 (Brown), A3 (Brown). If exposure levels can not be determined or estimated with a sufficient degree of confidence or a lack of oxygen is possible, only SCBA insulation can be used.
Avoid skin contact. Wear suitable protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This substance is stable under the recommended handling and storage conditions in section 7.
No data available.
None under normal conditions of use.
heating, heat, flames and hot surfaces, sparks
acids, bases, strong oxidising agents
carbon monoxide (CO), carbon dioxide (CO2)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1294
- Shipping Name
- TOLUENE
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for THINNER SYNTHETIQUE / SYNTHETISCHE THINNER/SYNTHETISCHER VERDUNNER?
The signal word is danger.
What is the physical form of THINNER SYNTHETIQUE / SYNTHETISCHE THINNER/SYNTHETISCHER VERDUNNER?
THINNER SYNTHETIQUE / SYNTHETISCHE THINNER/SYNTHETISCHER VERDUNNER is a fluid liquid. .
What is THINNER SYNTHETIQUE / SYNTHETISCHE THINNER/SYNTHETISCHER VERDUNNER used for?
Thinner for synthetic paints
What are the hazard statements for THINNER SYNTHETIQUE / SYNTHETISCHE THINNER/SYNTHETISCHER VERDUNNER?
This substance has 7 hazard statements:
- H225: Highly flammable liquid and vapour.
- H304: May be fatal if swallowed and enters airways.
- H315: Causes skin irritation.
- H336: May cause drowsiness or dizziness.
- H361d: Suspected of damaging the unborn child.
- H373: May cause damage to organs through prolonged or repeated exposure (if inhaled).
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of THINNER SYNTHETIQUE / SYNTHETISCHE THINNER/SYNTHETISCHER VERDUNNER?
The melting point is -95 °C. and the boiling point is 110 °C..