Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- E.33
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
PC35 Washing and cleaning products (including solvent based products). Application of the substance / the mixture: Professional use only
Manufacturers & Suppliers
i-team
manufacturer
Hoppenkuil 27B, 5626 DD, Eindhoven, Nederland
http://www.i-teamglobal.com
Emergency Contacts
Emergency Contact
+31 53 4282860
During office hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Urea Hydrochloride EC: 208-059-8 | 506-89-8 | 2.5 - 10% | Yes |
| Dipropylene glycol monomethyl ether EC: 252-104-2 | 34590-94-8 | 2.5% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm. In case of unconsciousness place patient stably in side position for transportation.
Take off contaminated clothing immediately and wash the skin with plenty of water (possibly showering).
Rinse opened eye for several minutes (at least 15 minutes) under running water. If possible, remove contact lenses.
Rinse out mouth and then drink plenty of water. Induce vomiting only, if affected person is fully conscious.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire extinguishing methods suitable to surrounding conditions. All extinguishing media are possible.
Carbon monoxide can arise from incomplete combustion.
Firefighter Protection
Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow product to reach sewage system or any water course. Remainder dilute with plenty of water. Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Do not eat, drink or smoke while working. In the immediate vicinity of any potential exposure source, eye wash stations and emergency showers should be available.
Protect from frost. Store receptacle in fume cupboard.
Do not eat, drink or smoke while working.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Only use chemical-protective gloves with CE-labelling of category III. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Gloves Neo-Nitrile™ 300 – AQL or 0.65 (level 3). Thickness-0.35 mm. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Goggles recommended during refilling. Tightly sealed goggles
Not necessary if room is well-ventilated.
Prevent spills from reaching surface waters or soil.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
Stable under recommended conditions.
Violent reactions with strong alkalis and oxidising agents.
No decomposition if used according to specifications.
Strong bases
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for E.33?
The signal word is no signal word.
What is the physical form of E.33?
E.33 is a liquid with pink color. It has characteristic odor.
What is E.33 used for?
PC35 Washing and cleaning products (including solvent based products). Application of the substance / the mixture: Professional use only
What is the melting point of E.33?
The melting point is Not determined. and the boiling point is 100 °C.