NextSDS Logo
Safety Data Sheet EN

Alurex Forte

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Alurex Forte
Product Code
10020

Regulatory Identifiers

CAS Number
N/A

Identified Uses

metalcleaner for professional use

Manufacturers & Suppliers

C

Chemtec Chemicals

national supplier

Breevaartstraat 71, NL-3044 AG Rotterdam

+31(0)10 412 09 74

Emergency Contacts

Emergency Contact

+31(0) 623 50 23 55

outside office hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

T+, very toxic
C, corrosive

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS06 - Acute toxicity

GHS06

Hazard Statements

H314 The substance is corrosive to eyes, skin, mucous membranes of the mouth and throat and respiratory system.
H330 In severe cases, risk of death.
H335 Inhalation of vapor and / or mist may cause respiratory distress (pulmonary edema).
H412 Due to the low pH value the product is toxic for the aquatic environment

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Substances presenting a health or environmental hazard in compliance with directive 67/548/EC.

Chemical Name CAS Number Concentration Hazardous
Hydrofluoric acid EC: 231-634-8 7664-39-3 10 - 20% Yes
Fosforic acid EC: 231-633-2 7664-38-2 5 - 10% Yes
Butylglycol EC: 203-905-0 111-76-2 5% Yes

Given concentrations are percentages by weight See section 16 for full text of R-phrases declared above.

Notes

Hazardous substances

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. Keep person warm and at rest. If not breathing or breathing is irregular or respiratory arrest occurs provide artificial respiratory or oxygen by trained personnel. Give nothing by mouth. If unconscious place in recovery position and seek medical attention.

Skin contact

Remove contaminated clothing and shoes. Wash skin with plenty of water and soap. Do not use solvents or thinner.

Eye contact

Check for and remove contact lenses. Immediately flush eyes with running water for at least 15 minutes keeping eyelids open.

Ingestion

If swallowed seek medical advice immediately and show the container or this label. Keep person warm and at rest. Do not induce vomiting.

Immediate Medical Attention

In all cases of doubt, or when symptoms persist, always seek medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Alcohol resistant foam, powder and water mist.

Unsuitable media

Water jet.

Specific hazards

Thick black smoke, CO2 and NO2 which may cause a health hazard.

Instructions

Cool containers near the fire with running water.

Firefighter Protection

Use of a self containing breathing apparatus and protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate the room. Consult a specialist. Forced ventilation is mandatory, prevent the substance to spread.

Environmental

prevent the substance to spread

Cleanup methods

place in a container for disposal in accordance with local regulations

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with skin and eyes. Do not breath vapour or aerosol. Do not use compressed air to discharge container.

Storage

Keep container tightly closed and in original container. Store containers upright.

Hygiene

Eating, drinking and smoking should be prohibited in areas were this material is handled, stored or processed.

Fire prevention

Keep away from ignition sources, naked lights and open flames. Ground vessels and pipes.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use only in well ventilated areas.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Cloud Point
---
Physical State
liquid
Evaporation Rate
---
Kinematic Viscosity
---
Solubility In Fat
---
Lower Explosive Limit
1,1 % by volume
Explosive Limits
---
Colour
colorless
Solubility
---
Melting Point
no data
Vapor Pressure
21 m Bar/20° C
Crystallisation Point
---
Flash Point
> 61° C
Metal Corrosion
---
Vapor Density
---
Freezing Point
---
Solidification Point
---
Molecular Weight
---
Boiling Point
> 100° C at 1013 hPa
Solubility In Water
complete
Ph
< 1
Bulk Density
---
Relative Density
---
Density
1,05 g/m³
Odor Threshold
---
Form
---
Odor
acid / solvent
Appearance
---
Relative Evaporation Rate
---
Voc Content
50 g/ltr VOC
Properties Status
---
State Under Standard Conditions
---
Colour Intensity
---
Flammability
---
Auto Ignition Temperature
> 240° C
Softening Point
---
Physical State Data
liquid
Dynamic Viscosity
no data
Decomposition Temperature
---
Partition Coefficient
---
Upper Explosive Limit
10,6 % by volume
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Under conditions as normal the product is stabile.

Incompatible

Oxidising agents, strong acids en alkaline materials

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1790
Shipping Name
Hydro fluoric acid solution
Transport Class
8, 6.1
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Alurex Forte?

The signal word is danger.

What is the physical form of Alurex Forte?

Alurex Forte is a liquid with colorless color. It has acid / solvent odor.

What is Alurex Forte used for?

metalcleaner for professional use

What are the hazard statements for Alurex Forte?

This substance has 4 hazard statements:

  • H314: The substance is corrosive to eyes, skin, mucous membranes of the mouth and throat and respiratory system.
  • H330: In severe cases, risk of death.
  • H335: Inhalation of vapor and / or mist may cause respiratory distress (pulmonary edema).
  • H412: Due to the low pH value the product is toxic for the aquatic environment

What is the melting point of Alurex Forte?

The melting point is no data and the boiling point is > 100° C at 1013 hPa.