Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Indu Solv
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaner
Manufacturers & Suppliers
BOMA
Noorderlaan 131, B2030 Antwerpen
003232313389
http://www.boma.eu/
Emergency Contacts
Emergency Contact
+32 70 245 245
Emergency Contact
+31 30 274 88 88
Emergency Contact
+ 33 (0)1 45 42 59 59
Emergency Contact
(+352) 8002-5500
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C10, aromatics, ≥1% naphthalene EC: 919-284-0 | --- | 30% | Yes |
| Naphthalene EC: 202-049-5 | 91-20-3 | 5 - 15% | Yes |
| 1,2,4-trimethylbenzene EC: 202-436-9 | 95-63-6 | 5 - 15% | Yes |
| 1,2,3-trimethylbenzene EC: 247-099-9 | 25551-13-7 | 5 - 15% | Yes |
| mesitylene EC: 203-604-4 | 108-67-8 | 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
let sit upright, fresh air, rest and take to hospital.
Symptoms: sore throat, cough, shortness of breath, headache
remove contaminated clothing, rinse skin with plenty of water and immediately transport to hospital.
Symptoms: redness, pain
first prolonged rinsing with water (contact lenses to be removed if this is easily done) then take to physician.
Symptoms: redness
rinse mouth, do not induce vomiting, take to hospital immediately.
Symptoms: diarrhoea, headache, abdominal cramps, sleepiness, vomiting
Immediate Medical Attention
Immediately transport to hospital or take to physician for all exposure routes.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, foam, powder, sprayed water
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not walk into or touch spilled substances and avoid inhalation of fumes, smoke, dusts and vapours by staying up wind. Remove any contaminated clothing and used contaminated protective equipment and dispose of it safely.
do not allow to flow into sewers or open water.
If possible remove by using absorbent material.
Materials: absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
handle with care to avoid spillage.
keep in a sealed container in a closed, frost-free, ventilated room.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
use with sufficient exhaust ventilation.
handling with Viton-gloves (EN 374). Breakthrough time: >480' Material thickness: 0,7 mm. Thoroughly check gloves before use. Take of the gloves properly without touching the outside with your bare hands. The manufacturer of the protective gloves has to be consulted about the suitability for a specific work station.
Tight-fitting safety goggles. Wear a face shield and protective suit in case of exceptional processing problems.
If necessary, use an air-purifying face mask in case of respiratory hazards. Use the ABEK type as protection against these troublesome levels.
impermeable clothing. The type of protective equipment depends on the concentration and amount of hazardous substances at the work station in question.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
extremely high or low temperatures.
stable under normal conditions.
protect from sunlight and do not expose to temperatures exceeding + 50°C.
acids, alkalines, oxidants, reductants
doesn't decompose with normal use
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s. (mixture with Hydrocarbons, C10, aromatics, ≥1% naphthalene)
- Transport Class
- 9
- Packing Group
- III
Hazard characteristics: Risk to the aquatic environment and the sewerage system.
Hazard characteristics: Risk to the aquatic environment and the sewerage system.
Hazard characteristics: Risk to the aquatic environment and the sewerage system.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Indu Solv?
The signal word is danger.
What is the physical form of Indu Solv?
Indu Solv is a liquid appearing as liquid . It has characteristic odor.
What is Indu Solv used for?
Cleaner
What are the hazard statements for Indu Solv?
This substance has 6 hazard statements:
- H304: May be fatal if swallowed and enters airways.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H351: Suspected of causing cancer.
- H411: Toxic to aquatic life with long lasting effects.