NextSDS Logo
Safety Data Sheet EN

210026 Carrara Spray

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
210026 Carrara Spray
Product Code
210026

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Crystallizer (AISE_SUMI_PW_11_1_G)

Manufacturers & Suppliers

BOMA logo

BOMA

distributor

Noorderlaan 131, B2030 Antwerpen

003232313389

http://www.boma.eu/

Emergency Contacts

Emergency Contact

+32 70 245 245

Nationaal Vergiftigingen Informatie Centrum (NVIC)

+31 88 755 8000

Emergency Contact

+ 33 (0)1 45 42 59 59

Emergency Contact

(+352) 8002-5500

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 4 H302
Eye Dam. Cat. 1 H318
Aquatic Chronic Cat. 3 H412
EUH208

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H302 Harmful if swallowed.
H318 Causes serious eye damage.
H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P264 Wash hands thoroughly after handling.
P270 Do no eat, drink or smoke when using this product.
P273 Avoid release to the environment.
P280 Wear protective gloves, protective clothing, eye protection, face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Magnesium fluosilicate EC: 241-022-2 16949-65-8 20% Yes
Sodiumlaurylsulphate EC: 287-809-4 85586-07-8 9% Yes
alpha-Pinene EC: 201-291-9 80-56-8 0.9% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Let sit upright, fresh air, rest and take to hospital.

Symptoms: Headache, dizziness, nausea, drowsiness, unconsciousness

Skin contact

Remove contaminated clothing, rinse skin with plenty of water and immediately transport to hospital.

Symptoms: Caustic, redness, pain, serious burns

Eye contact

Thoroughly rinse with water (contact lenses to be removed if this is easily done) then take to physician.

Symptoms: Caustic, redness, blurred vision, pain

Ingestion

Rinse mouth, do not induce vomiting, take to hospital immediately.

Symptoms: Caustic, lack of breath, vomiting, blisters on lips and tongue, burning pain in mouth and throat, gullet and stomach

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, foam, powder, sprayed water

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Do not walk into or touch spilled substances and avoid inhalation of fumes, smoke, dusts and vapours by staying up wind. Remove any contaminated clothing and used contaminated protective equipment and dispose of it safely.

Environmental

Do not allow to flow into sewers or open water.

Cleanup methods

If possible, remove by using absorbent material.

Materials: absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handle with care to avoid spillage.

Storage

Keep in a sealed container in a closed, frost-free, ventilated room.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

The level of protection and types of controls necessary will vary depending upon potential exposure conditions. Adequate ventilation should be provided so that exposure limits are not exceeded. For further information, check section 7.

Hands

Handling with Viton-gloves (EN 374). Breakthrough time: >480' Material thickness: 0,7 mm. Thoroughly check gloves before use. Take of the gloves properly without touching the outside with your bare hands. The manufacturer of the protective gloves has to be consulted about the suitability for a specific work station. Wash and dry your hands.

Eyes

Keep an eye-rinse bottle within reach. Tight-fitting safety goggles. Wear a face shield and protective suit in case of exceptional processing problems.

Respiratory

Use with sufficient exhaust ventilation. If necessary, use an air-purifying face mask in case of respiratory hazards. Use the ABEK type as protection against these troublesome levels.

Skin/Body

Wear impermeable clothing. The type of protective equipment depends on the concentration and amount of hazardous substances at the work station in question.

Environmental

Comply with applicable environmental regulations limiting discharge to air, water and soil. Protect the environment by applying appropriate control measures to prevent or limit emissions. For further information, check sections 6 and 13.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Auto Ignition Temperature
---
Density
---
Ph
1.6
Melting Point
---
Explosive Limits
---
Decomposition Temperature
---
Solubility In Water
Not soluble
Kinematic Viscosity
1 mm²/s
Solidification Point
---
Freezing Point
---
Upper Explosive Limit
---
Solubility
---
Boiling Point
100 °C – 100 °C
Form
---
Physical State Data
liquid
Vapor Pressure
---
Softening Point
---
Molecular Weight
---
Relative Evaporation Rate
---
Lower Explosive Limit
---
Cloud Point
---
Dynamic Viscosity
1 mPa.s
Flammability
Not applicable
Solubility In Fat
---
Crystallisation Point
---
Physical State
Liquid
Appearance
---
Properties Status
---
Voc Content
0.000 g/l
Bulk Density
---
Vapor Density
Not applicable
Evaporation Rate
0.300
Partition Coefficient
Not applicable
Flash Point
---
Colour Intensity
---
State Under Standard Conditions
---
Relative Density
1.0920 kg/l
Odor
characteristic
Odor Threshold
---
Colour
colourless
Metal Corrosion
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Extremely high or low temperatures.

Reactivity

Stable under normal conditions.

Avoid

Protect from sunlight and do not expose to temperatures exceeding + 50°C.

Decomposition

Under recommended usage conditions, hazardous decomposition products are not expected.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 210026 Carrara Spray?

The signal word is danger.

What is the physical form of 210026 Carrara Spray?

210026 Carrara Spray is a liquid with colourless color. It has characteristic odor.

What is 210026 Carrara Spray used for?

Crystallizer (AISE_SUMI_PW_11_1_G)

What are the hazard statements for 210026 Carrara Spray?

This substance has 3 hazard statements:

  • H302: Harmful if swallowed.
  • H318: Causes serious eye damage.
  • H412: Harmful to aquatic life with long lasting effects.