Rapid Plus Seal

let sit upright, fresh air, rest and take to hospital.

remove contaminated clothing, rinse with plenty of water, if necessary seek medical attention.

first prolonged rinsing with water (contact lenses to be removed if this is easily done) then take to physician.

Symptoms: redness

rinse mouth, do not induce vomiting, take to hospital immediately.

Symptoms: diarrhoea, headache, abdominal cramps, sleepiness, vomiting

CO2, foam, powder, sprayed water

Do not walk into or touch spilled substances and avoid inhalation of fumes, smoke, dusts and vapours by staying up wind. Remove any contaminated clothing and used contaminated protective equipment and dispose of it safely.

Do not allow to flow into sewers or open water.

If possible remove by using absorbent material.

Materials: absorbent material

handle with care to avoid spillage.

keep in a sealed container in a closed, frost-free, ventilated room.

If necessary, use with sufficient exhaust ventilation.

handling with nitril-gloves (EN 374). Breakthrough time: >480' Material thickness: 0,35 mm. Thoroughly check gloves before use. Take of the gloves properly without touching the outside with your bare hands. The manufacturer of the protective gloves has to be consulted about the suitability for a specific work station.

Tight-fitting safety goggles. Wear a face shield and protective suit in case of exceptional processing problems.

respiratory protection is not required. Use ABEK type gas masks in case of irritating exposure.

impermeable clothing. The type of protective equipment depends on the concentration and amount of hazardous substances at the work station in question.

extremely high or low temperatures.

stable under normal conditions.

protect from sunlight and do not expose to temperatures exceeding + 50°C.

acids, alkalines, oxidants, reductants

doesn't decompose with normal use