NextSDS Logo
Safety Data Sheet EN

UV SEALER 661-X-107-005

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
UV SEALER 661-X-107-005
Product Code
661-X-107-005

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Coatings for industrial use

Manufacturers & Suppliers

T

Treffert Coatings GmbH

manufacturer

Am Kirchberg 1, 63754 Alzenau

+49 (0) 6023/961-0

Emergency Contacts

Treffert Coatings GmbH

+49 (0) 6023/961-0

Monday to Friday 8.00 to 16.00 o'clock

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2 H319
Skin Sens. Cat. 1 H317

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.

Precautionary Statements

P280 Wear protective gloves and eye/face protection.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Radiation-hardening preparations

Chemical Name CAS Number Concentration Hazardous
2,2-bis(acryloyloxymethyl)butyl acrylate EC: 239-701-3 15625-89-5 50 - 100% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove casualty to fresh air and keep warm and at rest. In case of irregular breathing or respiratory arrest provide artificial respiration.

Skin contact

Remove contaminated, saturated clothing immediately. After contact with skin, wash immediately with plenty of water and soap. Do not use solvents or thinners. Conditions to avoid: UV-radiation/sunlight

Symptoms: Causes mild skin irritation.

Eye contact

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical advice immediately.

Ingestion

If swallowed, rinse mouth with water (only if the person is conscious). Seek medical advice immediately. Keep victim calm. Do NOT induce vomiting.

Immediate Medical Attention

Seek medical advice immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

alcohol resistant foam, carbon dioxide fire blanket, Powder, spray mist, (water)

Unsuitable media

strong water jet

Specific hazards

Dense black smoke occurs during fire. Inhaling hazardous decomposing products can cause serious health damage.

Instructions

Cool closed containers that are near the source of the fire.

Firefighter Protection

Provide a conveniently located respiratory protective device.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Keep away from sources of ignition. Ventilate affected area. Do not breathe vapours.

Environmental

Do not allow to enter into surface water or drains.

Cleanup methods

Clean using cleansing agents. Do not use solvents.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use only in well-ventilated areas. Keep away from heat sources, sparks and open flames. Avoid contact with skin, eyes and clothes. Do not inhale dusts, particulates and spray mist when using this preparation. Avoid respiration of swarf. When using do not eat, drink or smoke. Personal protection equipment: refer to chapter 8. Do not empty containers with pressure - no pressure vessel! Always keep in containers that correspond to the material of the original container. Follow the legal protection and safety regulations.

Storage

Store in a well-ventilated and dry room at temperatures between 5 °C and 30 °C. Protect from heat and direct sunlight. Keep container tightly closed. Store carefully closed containers upright to prevent any leaks. Keep only in the original container.

Hygiene

When using do not eat, drink or smoke.

Fire prevention

Keep away from heat sources, sparks and open flames. Remove all sources of ignition. Smoking is forbidden.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide good ventilation. This can be achieved with local or room suction.

Hands

For prolonged or repeated handling the following glove material must be used: Nitrilkautschuk oder Butylkautschuk. Thickness of the glove material > 0,4 mm; Breakthrough time (maximum wearing time) > 480 min. Observe the instructions and details for use, storage, maintenance and replacement provided by the protective glove manufacturer. Penetration time of glove material depending on intensity and duration of exposure to skin. Recommended glove articles DIN EN 374. Barrier creams can help protecting exposed skin areas. In no case should they be used after contact.

Eyes

Wear closely fitting protective glasses in case of splashes.

Respiratory

If concentration of solvents is beyond the occupational exposure limit values, approved and suitable respiratory protection must be used. Observe the wear time limits according GefStoffV in combination with the rules for using respiratory protection apparatus (BGR 190). Use only respiratory protection equipment with CE-symbol including four digit test number.

Skin/Body

Wear antistatic clothing of natural fibers (cotton) or heat resistant synthetic fibers.

Environmental

Do not allow to enter into surface water or drains. See chapter 7. No additional measures necessary.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Flash Point
> 100 °C
Density
1,15 g/cm³
Cloud Point
---
Solubility In Fat
---
Odor Threshold
---
Kinematic Viscosity
---
Dynamic Viscosity
---
Colour Intensity
---
Ph
---
Physical State
liquid
Appearance
liquid, colourless, characteristic
Explosive Limits
---
Auto Ignition Temperature
385 °C
Vapor Pressure
n.a.
Freezing Point
---
Metal Corrosion
---
Partition Coefficient
---
Properties Status
---
Decomposition Temperature
---
Form
---
Vapor Density
---
Relative Evaporation Rate
---
Solubility In Water
partially soluble
Flammability
---
Relative Density
---
Voc Content
0,08 Wt %
Solubility
---
Upper Explosive Limit
n.a.
Odor
characteristic
Solidification Point
---
Softening Point
---
Molecular Weight
---
Evaporation Rate
---
Physical State Data
liquid
Boiling Point
---
Melting Point
---
State Under Standard Conditions
---
Lower Explosive Limit
n.a.
Crystallisation Point
---
Colour
colourless
Bulk Density
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable when applying the recommended regulations for storage and handling. Further information on correct storage: refer to chapter 7.

Hazardous reactions

Keep away from strong acids, strong bases and strong oxidizing agents to avoid exothermic reactions.

Avoid

Heat, strong ultraviolet radiation. An exotherm polymerization of the product may thereby be caused. Avoid unintended contact with it. Hazardous decomposition byproducts may form with exposure to high temperatures.

Incompatible

strong acids, strong bases and strong oxidizing agents

Decomposition

carbon dioxide, carbon monoxide, smoke, nitrogen oxides

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Do not allow to enter into surface water or drains. This material and its container must be disposed of in a safe way. Waste disposal according to directive 2008/98/EC, covering waste and dangerous waste.

Disposal

Do not allow to enter into surface water or drains. This material and its container must be disposed of in a safe way.

Waste Codes

080111 waste paint and varnish containing organic solvents or other dangerous substances EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
n.a.
Shipping Name
n.a.
Transport Class
n.a.
Packing Group
n.a.
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for UV SEALER 661-X-107-005?

The signal word is warning.

What is the physical form of UV SEALER 661-X-107-005?

UV SEALER 661-X-107-005 is a liquid appearing as liquid, colourless, characteristic with colourless color. It has characteristic odor.

What is UV SEALER 661-X-107-005 used for?

Coatings for industrial use

What are the hazard statements for UV SEALER 661-X-107-005?

This substance has 3 hazard statements:

  • H315: Causes skin irritation.
  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.