Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Safranal
- Product Code
- 31399
- Chemical Name
- Safranal
- Synonyms
- 2,6,6-trimethyl-1,3-cyclohexadiene-1-carboxaldehyde
Regulatory Identifiers
- CAS Number
- 116-26-7 Check regulations →
- EC Number
- 204-133-7 Check regulations →
Identified Uses
This product is for research use - Not for human or veterinary diagnostic or therapeutic use.
Manufacturers & Suppliers
Cayman Chemical Co.
manufacturer
1180 E. Ellsworth Rd., Ann Arbor, MI 48108, USA
Emergency Contacts
Emergency Contact
+1 (734) 971-3335
During normal opening times
Emergency Contact
800-424-9300
Emergency Contact
703-741-5970
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Safranal EC: 204-133-7 | 116-26-7 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air and to be sure call for a doctor. In case of unconsciousness place patient stably in side position for transportation.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Immediately call a doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
No further relevant information available.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Not required.
Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water.
Pick up mechanically.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special precautions are necessary if used correctly. Avoid breathing dust/fume/gas/mist/vapours/spray. Avoid prolonged or repeated exposure. Keep away from sources of ignition. Take precautionary measures against static discharge.
Keep container tightly closed. Store in accordance with information listed on the product insert. Keep receptacle tightly sealed.
Keep away from sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
Not required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
strong acids, strong bases, strong oxidizing agents
carbon oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Safranal known by?
Safranal is also known as: 2,6,6-trimethyl-1,3-cyclohexadiene-1-carboxaldehyde
What is the hazard signal word for Safranal?
The signal word is warning.
What is the physical form of Safranal?
Safranal is a solid appearing as not determined. with not determined. color. It has characteristic odor.
What is Safranal used for?
This product is for research use - Not for human or veterinary diagnostic or therapeutic use.
What are the hazard statements for Safranal?
This substance has 5 hazard statements:
- H302: Harmful if swallowed.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Safranal?
The melting point is Undetermined. and the boiling point is Undetermined..