Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BOC-D-SERINE METHYLESTER
- Product Code
- 04-876
- Synonyms
- Boc-D-Ser-OMe
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
INDOFINE Chemical Company, Inc.
manufacturer
121 Stryker Lane, Building 30, Hillsborough, NJ 08844
(908) 359-6778
Emergency Contacts
Emergency Contact
800-424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Boc-D-Ser-OMe | 95715-85-8 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the victim from the source of exposure to fresh, uncontaminated air. If victim's breathing is difficult, administer oxygen. Seek medical attention.
After contact with skin, wash with generous quantities of running water. Gently and thoroughly was affected area with running water and non-abrasive soap. Cool water may be used. Cover the affected area with emollient. Seek medical attention. Wash any contaminated clothing prior to reusing.
Check for and remove any contact lenses. Immediately flush eyes with clean, running water for at least 15 minutes while keeping eyes open. Cool water may be used. Seek medical attention.
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Seek medical attention.
Immediate Medical Attention
Seek medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide, dry powder, regular foam.
Can emit toxic fumes under fire conditions.
Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.
Firefighter Protection
Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Scoop up solid material or absorb liquid material and place into appropriate container. Ventilate area and wash affected spill area after pickup is complete. Wash skin immediately with plenty of water. Place solid or absorbed material into containers and close for disposal.
Scoop up solid material or absorb liquid material and place into appropriate container.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not breathe dust or vapor. Do not get in eyes, on skin or on clothing.
Store in a cool, dry, well-ventilated place. Keep container tightly closed.
Have safety shower and eye wash available.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Safety shower and eye bath. Mechanical exhaust required.
Handle with chemical-resistant gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
Wear protective safety goggles. Use equipment for eye protection tested and approved under appropriate government standards.
Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Wear protective clothing and chemical resistant boots to protect against chemical. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No data available.
No hazardous reactions during storage and handling complying with the instructions.
No data available.
No data available
No hazardous decomposition products if the instructions for handling and storage are respected. During high overheating of the substance or during a fire, hazardous decomposition products may be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BOC-D-SERINE METHYLESTER known by?
BOC-D-SERINE METHYLESTER is also known as: Boc-D-Ser-OMe
What is the hazard signal word for BOC-D-SERINE METHYLESTER?
The signal word is no signal word.
What is the physical form of BOC-D-SERINE METHYLESTER?
BOC-D-SERINE METHYLESTER is a light yellowish liquid appearing as light yellowish liquid . It has no data available odor.