NextSDS Logo
Safety Data Sheet EN

(R)-3-BOC-AMINOPIPERIDINE

CAS 309956-78-3

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
(R)-3-BOC-AMINOPIPERIDINE
Product Code
66683

Regulatory Identifiers

CAS Number
309956-78-3 Check regulations →

Identified Uses

Laboratory chemicals, Manufacture of substances

Manufacturers & Suppliers

AstaTech, Inc. logo

AstaTech, Inc.

manufacturer

Keystone Business Park, 2525 Pearl Buck Road, Bristol, PA 19007, USA

+1-215-785-3197

http://www.astatechinc.com

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H315 Causes skin irritation
H318 Causes serious eye damage
H335 May cause respiratory irritation
H400 Very toxic to aquatic life

Precautionary Statements

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
(R)-3-BOC-AMINOPIPERIDINE 309956-78-3 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.

Skin contact

Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician.

Eye contact

Flush eyes with water as a precaution.

Ingestion

Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

Immediate Medical Attention

Consult a physician. Take victim immediately to hospital.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Specific hazards

Nitrogen oxides (NOx), Hydrogen chloride

Instructions

Wear self-contained breathing apparatus for fire-fighting if necessary.

Firefighter Protection

Wear self-contained breathing apparatus for fire-fighting if necessary.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate personnel to safe areas.

Cleanup methods

Pick up and arrange disposal without creating dust. Sweep up and shovel.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with skin and eyes. Avoid formation of dust and aerosols.

Storage

Keep container tightly closed in a dry and well-ventilated place. Storage Conditions: Room temperature

Fire prevention

Normal measures for preventive fire protection.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Good general ventilation should be sufficient to control airborne levels. Ventilation is normally required when handling or using this product. Eyewash fountains should be provided in areas where there is any possibility that workers could be exposed to the substance. Follow safe industrial engineering/laboratory practices when handling any chemical.

Hands

Nitrile gloves.

Eyes

Safety glasses.

Respiratory

Dust respirator. Be sure to use a MSHA/NIOSH approved respirator or equivalent.

Skin/Body

Lab coat.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Solid
Physical State Data
solid
State Under Standard Conditions
---
Appearance
White to Yellow Solid
Colour
---
Colour Intensity
---
Form
---
Odor
---
Odor Threshold
---
Ph
---
Melting Point
116-121 °C
Boiling Point
---
Flash Point
---
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
---
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions

Reactivity

No data available

Hazardous reactions

No data available

Avoid

No data available

Incompatible

Strong oxidizing agents

Decomposition

No data available

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3077
Shipping Name
Environmentally hazardous substances, solid, n.o.s.
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for (R)-3-BOC-AMINOPIPERIDINE?

The signal word is danger.

What is the physical form of (R)-3-BOC-AMINOPIPERIDINE?

(R)-3-BOC-AMINOPIPERIDINE is a solid appearing as white to yellow solid .

What is (R)-3-BOC-AMINOPIPERIDINE used for?

Laboratory chemicals, Manufacture of substances

What are the hazard statements for (R)-3-BOC-AMINOPIPERIDINE?

This substance has 4 hazard statements:

  • H315: Causes skin irritation
  • H318: Causes serious eye damage
  • H335: May cause respiratory irritation
  • H400: Very toxic to aquatic life

What is the melting point of (R)-3-BOC-AMINOPIPERIDINE?

The melting point is 116-121 °C .