Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Esenta adhesive remover wipe 3ml
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
The product is intended for professional use Medical application Professional use
Manufacturers & Suppliers
ConvaTec Limited
manufacturer
First Avenue, Deeside Industrial Park, Deeside, Flintshire, CH5 2NU, United Kingdom
+44 (0) 1244 284 882
Emergency Contacts
Emergency Contact
1-866-968-6376
Monday - Friday 8:30 till 7pm EST
Emergency Contact
1-800-465-6302
Monday - Friday 8:00 till 6pm EST
Emergency Contact
+44(0)1244 284 882
Monday - Friday 8:30 till 4pm GMT
Emergency Contact
+61(0)3 9239 2700
Monday - Friday 8:00 till 5pm Sydney time
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Medical device
All the percentages given are percentages by weight unless stated otherwise.
Notes
The product does not contain any other ingredients which are classified according to present knowledge of the supplier and contribute to the classification of the product and hence require reporting in this section.
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. In case of respiratory tract irritation, consult a physician.
Remove contaminated clothing and shoes. Wash with water and soap. Seek immediate medical advice if symptoms occur.
Irrigate copiously with clean, fresh water for at least 15 minutes, holding the eyelids apart. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Do not induce vomiting; call for medical help immediately. Rinse mouth with clean water.
Immediate Medical Attention
In all cases of doubt, or when symptoms persist, seek medical advice. If breathing is irregular or stopped, immediately seek medical assistance. Seek immediate medical advice if symptoms occur (skin). Call for medical help immediately (swallowing).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol resistant foam; Dry extinguishing powder; Carbon dioxide (CO2).
Water with full jet
In case of insufficient ventilation and/or in use, may form flammable/explosive vapour-air mixture. Solvent vapours are heavier than air and may spread along floors. Places which are not ventilated, e.g. unventilated below ground level areas such as trenches, conduits and shafts, are particularly prone to the presence of flammable substances or mixtures.
Co-ordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
Self-contained breathing apparatus (EN 133). Standard protective clothing for firefighters.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons to safety. Ventilate affected area.
Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.
Wipe up with absorbent material (e.g. cloth, fleece).
Materials: absorbent material (e.g. cloth, fleece)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat and direct sunlight.
Keep away from heat and direct sunlight.
Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.
Keep away from sources of ignition - No smoking. Take precautionary measures against static discharge.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
General ventilation.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.
The mixture contains reactive substance(s). Risk of ignition. If heated: Risk of ignition.
No dangerous reactions known.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use explosion-proof electrical/ventilating/lighting/equipment. Use only non-sparking tools. Take precautionary measures against static discharge.
Oxidisers
Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known. Hazardous combustion products: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3175
- Shipping Name
- SOLIDS CONTAINING FLAMMABLE LIQUID, N.O.S.
- Transport Class
- 4.1
- Packing Group
- II
Special Provision 216 (Not subject to the requirements of IMDG)
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Esenta adhesive remover wipe 3ml?
The signal word is danger.
What is the physical form of Esenta adhesive remover wipe 3ml?
Esenta adhesive remover wipe 3ml is a acc. to product description with acc. to product description color. It has acc. to product description odor.
What is Esenta adhesive remover wipe 3ml used for?
The product is intended for professional use Medical application Professional use
What are the hazard statements for Esenta adhesive remover wipe 3ml?
This substance has 1 hazard statement:
- H225: Flammable liquid and vapour.
What is the melting point of Esenta adhesive remover wipe 3ml?
The melting point is not determined and the boiling point is not determined.