Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- GLUE REMOVER 400 ML
- Product Code
- F100010
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For professional use only. Solvents.
Uses advised against
No additional information available.
Manufacturers & Suppliers
MULTITASK INDUSTRIES
manufacturer
KARNEMELKSTRAAT 12, 9060 ZELZATE / BELGIUM
+32 (0)9 282 43 61
http://www.multitaskindustries.be
Emergency Contacts
Poison control centre (Brussels)
+32 (0)70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C10-C13, n-alkanes, isoalkanes, cyclics, < 2% aromatics | 64742-48-9 | 25 - 50% | Yes |
| CITRUS SINENSIS PEEL OIL EXPRESSED EC: 232-433-8 | 8028-48-6 | 25 - 50% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Allow affected person to breathe fresh air. Allow the victim to rest.
Symptoms: Cough.
Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. Take off contaminated clothing and wash it before reuse.
Symptoms: Causes skin irritation. May cause an allergic skin reaction.
Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persists.
Symptoms: Direct contact with the eyes is likely to be irritating.
Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.
Immediate Medical Attention
Obtain emergency medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Do not use a heavy water stream.
Extremely flammable aerosol. Heat may build pressure, rupturing closed containers, spreading fire and increasing risk of burns and injuries.
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire fighting water from entering the environment. DO NOT fight fire when fire reaches explosives. Evacuate area.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. Ventilate area.
Avoid release to the environment.
Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.
Materials: inert solids, such as clay or diatomaceous earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not spray on an open flame or other ignition source. Keep away from sources of ignition - No smoking. No open flames. No smoking. Do not pierce or burn, even after use.
Keep only in the original container in a cool, well-ventilated place away from: Heat sources. Keep container closed when not in use. Do not expose to temperatures exceeding 50 °C/ 122 °F. Keep in fireproof place.
Do not eat, drink or smoke when using this product.
Do not spray on an open flame or other ignition source. Keep away from sources of ignition - No smoking. No open flames.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear protective gloves.
Chemical goggles or safety glasses.
Wear appropriate mask.
Wear suitable protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Extremely flammable aerosol. Contains gas under pressure; may explode if heated. Extreme risk of explosion by shock, friction, fire or other sources of ignition.
No additional information available.
Not established.
shock, friction, fire or other sources of ignition, heat
Strong acids. Strong bases.
Fume. Carbon monoxide. Carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- III
63, 190, 277, 327, 344, 959
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for GLUE REMOVER 400 ML?
The signal word is danger.
What is the physical form of GLUE REMOVER 400 ML?
GLUE REMOVER 400 ML is a liquid. with colourless. color. It has characteristic. odor.
What is the solubility of GLUE REMOVER 400 ML?
Not available.
What is GLUE REMOVER 400 ML used for?
For professional use only. Solvents.
What are the hazard statements for GLUE REMOVER 400 ML?
This substance has 5 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of GLUE REMOVER 400 ML?
The melting point is Not available. and the boiling point is Not available..