Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Incidin Pro
- Product Code
- 116494E
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Surface Disinfectant
Uses advised against
Reserved for industrial and professional use.
Manufacturers & Suppliers
Ecolab Ltd.
manufacturer
PO Box 11; Winnington Avenue, Northwich, Cheshire, United Kingdom CW8 4DX
+ 44 (0)1606 74488
Emergency Contacts
Emergency Contact
+441618841235
Trans-European
+32-(0)3-575-5555
Poison Information Centre
0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-phenoxyethanol EC: 204-589-7 | 122-99-6 | 10 - 20% | Yes |
| N-(3-aminopropyl)-N- dodecylpropane-1,3- diamine EC: 219-145-8 | 2372-82-9 | 5 - 10% | Yes |
| benzalkonium chloride EC: 939-253-5 | 68424-85-1 | 5 - 10% | Yes |
| monoethanolamine EC: 205-483-3 | 141-43-5 | 1 - 2.5% | Yes |
| C10-16 Polyglycoside EC: 600-975-8 | 110615-47-9 | 1 - 3% | Yes |
| d-glucopyranose, oligomeric, decyl octyl glycosides EC: 500-220-1 | 68515-73-1 | 1 - 3% | Yes |
| Reaction mass of [[(2- hydroxyethyl)imino]bis(me thylene)]bisphosphonic acid and Phosphonic acid, P-[(tetrahydro-2-hydroxy- 2-oxido-4H- EC: 911-811-2 | --- | 0.1 - 0.25% | Yes |
| sodium hydroxide EC: 215-185-5 | 1310-73-2 | 0.1 - 0.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Product AS SOLD: Remove to fresh air. Treat symptomatically. Get medical attention if symptoms occur. Product AT USE DILUTION: Get medical attention if symptoms occur.
Product AS SOLD: Wash off immediately with plenty of water for at least 15 minutes. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention immediately. Product AT USE DILUTION: Rinse with plenty of water.
Product AS SOLD: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention immediately. Product AT USE DILUTION: Rinse with plenty of water.
Product AS SOLD: Rinse mouth with water. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention immediately. Product AT USE DILUTION: Rinse mouth. Get medical attention if symptoms occur.
Immediate Medical Attention
Get medical attention immediately (for eye, skin, ingestion as sold). Get medical attention if symptoms occur (for inhalation as sold, and all routes at use dilution).
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
None known.
Not flammable or combustible.
In the event of fire and/or explosion do not breathe fumes.
Firefighter Protection
Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Keep people away from and upwind of spill/leak. Avoid inhalation, ingestion and contact with skin and eyes. When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. Ensure clean-up is conducted by trained personnel only. Refer to protective measures listed in sections 7 and 8.
For large spills, dike spilled material or otherwise contain material to ensure runoff does not reach a waterway.
Do not allow contact with soil, surface or ground water.
Ensure clean-up is conducted by trained personnel only.
Materials: non-combustible absorbent material (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not ingest. Do not get in eyes, on skin, or on clothing. Use only with adequate ventilation. Wash hands thoroughly after handling. Do not breathe spray, vapour. In case of mechanical malfunction, or if in contact with unknown dilution of product, wear full Personal Protective Equipment (PPE).
Keep out of reach of children. Keep container tightly closed. Store in suitable labeled containers.
Handle in accordance with good industrial hygiene and safety practice. Remove and wash contaminated clothing before re-use. Wash face, hands and any exposed skin thoroughly after handling. Provide suitable facilities for quick drenching or flushing of the eyes and body in case of contact or splash hazard.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Effective exhaust ventilation system Maintain air concentrations below occupational exposure standards.
Recommended preventive skin protection, Gloves, Nitrile rubber, butyl-rubber, Breakthrough time: 1 – 4 hours, Minimum thickness for butyl-rubber 0.7 mm for nitrile rubber 0.4 mm or equivalent (please refer to the gloves manufacturer/distributor for advise). Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough.
Safety goggles, Face-shield
None required if airborne concentrations are maintained below the exposure limit listed in Exposure Limit Information. Use certified respiratory protection equipment meeting EU requirements(89/656/EEC, (EU) 2016/425), or equivalent, when respiratory risks cannot be avoided or sufficiently limited by technical means of collective protection or by measures, methods or procedures of work organization.
Personal protective equipment comprising: suitable protective gloves, safety goggles and protective clothing including appropriate safety shoes
Consider the provision of containment around storage vessels.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
No dangerous reaction known under conditions of normal use.
None known.
None known.
Carbon oxides, nitrogen oxides (NOx)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1903
- Shipping Name
- DISINFECTANT, LIQUID, CORROSIVE, N.O.S. (Quaternary ammonium compound, Alkylamine(s))
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Incidin Pro?
The signal word is danger.
What is the physical form of Incidin Pro?
Incidin Pro is a liquid appearing as liquid with clear, light yellow color. It has amine-like odor.
What is Incidin Pro used for?
Surface Disinfectant
What are the hazard statements for Incidin Pro?
This substance has 4 hazard statements:
- H302: Harmful if swallowed.
- H314: Causes severe skin burns and eye damage.
- H400: Very toxic to aquatic life.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Incidin Pro?
The melting point is Not applicable and/or not determined for the mixture and the boiling point is Not applicable and/or not determined for the mixture.