Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ADDI-PROX SC/F
- Product Code
- 40310010
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaner. Industrial use. Handling, dilution and transfers.
Uses advised against
None known.
Manufacturers & Suppliers
Oemeta (UK) Limited
manufacturer
Bramley House, 39 Main Road, OX17 2 ND Middleton Cheney, United Kingdom
(+44) 1295/713280
http://www.oemeta.com
Oemeta Chemische Werke GmbH
manufacturer
(+49) 4122-924-0
Emergency Contacts
Emergency Contact
(+44) 8 08 189 09 79
24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethanol, 2,2'-(methylimino)bis- EC: 203-312-7 | 105-59-9 | 10 - 20% | Yes |
| Methanol, [1,2-ethanediylbis(oxy)]bis- EC: 222-720-6 | 3586-55-8 | 5 - 10% | Yes |
| Disodium dodecyl(sulphonatophenoxy)benzene sulphonate EC: 249-063-8 | 119345-04-9 | 1 - 2.5% | Yes |
| 2-Pyridinethiol, 1-oxide, sodium salt EC: 223-296-5 | 3811-73-2 | 0.1 - 0.25% | Yes |
| Potassium hydroxide EC: 215-181-3 | 1310-58-3 | 0.01 - 0.1% | Yes |
| Other components below reportable levels | --- | 60 - 100% | No |
Notes
The full text for all H-statements is displayed in section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. Call a physician if symptoms develop or persist.
Take off immediately all contaminated clothing. Rinse skin with water/shower. Call a physician or poison control centre immediately. Chemical burns must be treated by a physician. Wash contaminated clothing before reuse.
Symptoms: Burning pain and severe corrosive skin damage.
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a physician or poison control centre immediately.
Symptoms: Causes serious eye damage. Symptoms may include stinging, tearing, redness, swelling, and blurred vision. Permanent eye damage including blindness could result.
Call a physician or poison control centre immediately. Rinse mouth. Do not induce vomiting. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs.
Immediate Medical Attention
Chemical burns must be treated by a physician. Call an ambulance. Continue flushing during transport to hospital.
Medical Treatment
Provide general supportive measures and treat symptomatically. Chemical burns: Flush with water immediately. While flushing, remove clothes which do not adhere to affected area. Call an ambulance. Continue flushing during transport to hospital. Keep victim under observation.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level. Eye wash facilities and emergency shower must be available when handling this product.
Wear appropriate chemical resistant gloves. Recommendation: 740 Lapren (KCL, Germany) with a layer thickness of at least 0.1 mm The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Wear safety glasses with side shields (or goggles) and a face shield.
In case of insufficient ventilation, wear suitable respiratory equipment. Where breathable aerosols/dust are formed, use suitable combination filter for gases/vapours of organic, inorganic, acid inorganic, alkaline compounds and toxic particles (e.g. type A/P2; EN 14387).
Wear appropriate chemical resistant clothing.
Environmental manager must be informed of all major releases.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1760
- Shipping Name
- Corrosive liquid, n.o.s. (Potassium hydroxide; Pyridine-2-thiol 1-oxide, Sodium Salt)
- Transport Class
- 8
- Packing Group
- III
Read safety instructions, SDS and emergency procedures before handling.
Read safety instructions, SDS and emergency procedures before handling.
Read safety instructions, SDS and emergency procedures before handling.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ADDI-PROX SC/F?
The signal word is danger.
What is the physical form of ADDI-PROX SC/F?
ADDI-PROX SC/F is a liquid. with colourless. color. It has characteristic. odor.
What is the solubility of ADDI-PROX SC/F?
Soluble.
What is ADDI-PROX SC/F used for?
Cleaner. Industrial use. Handling, dilution and transfers.
What are the hazard statements for ADDI-PROX SC/F?
This substance has 2 hazard statements:
- H314: Causes severe skin burns and eye damage.
- H318: Causes serious eye damage.
What is the melting point of ADDI-PROX SC/F?
The melting point is Not available. and the boiling point is Not available..