Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sodium hydroxide solution (NaOH) = 2 N (2 mol/l)
- Product Code
- 908
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Reagent for analysis
Manufacturers & Suppliers
Laboratoires Dujardin-Salleron
manufacturer
37210 Noizay France
+33 (0)2 47 25 58 25
http://www.dujardin-salleron.com
Emergency Contacts
INRS
+33 (0)1 45 42 59 59
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium hydroxide EC: 215-185-5 | 1310-73-2 | 5 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
fresh air.
wash off with plenty of water. Immediately remove contaminated clothing. In case of skin reaction, consult a physician.
rinse out with plenty of water with the eyelid held wide open. Consult an ophthalmologist if necessary.
make victim drink water (two glasses at most). Consult a physician in case of faintness.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water, foam, dry powder or carbon dioxide (CO2).
For this substance/mixture no limitations of extinguishing agents are given.
Not combustible. Ambient fire may liberate hazardous vapors.
Firefighter Protection
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
Do not empty into drains.
Collect, bind, and pump off spills. Take up with liquid-absorbent and neutralizing material (e.g. Trivorex ® (PREVOR). Clean up affected area.
Materials: liquid-absorbent and neutralizing material (e.g. Trivorex ® (PREVOR)
Related Products
Similar products with comparable safety profiles
Sodium hydroxide solution c(NaOH) = 1 mol/l (1 N) Titripur® Reag. Ph Eur,Reag. USP
UFI: 6QQX-855Q-X99P-WAHM
Sodium hydroxide solution c(NaOH) = 1 mol/l (1 N) Titripur® Reag. Ph Eur,Reag. USP
---
Sodium hydroxide solution c(NaOH) = 1 mol/l (1 N) Titripur® Reag. Ph Eur,Reag. USP
UFI: 6QQX-855Q-X99P-WAHM
Sodium Hydroxide Solution 4.5N
---
sodium hydroxide solution
UFI: JRPV-H05N-400Y-13SU, VNPV-00G7-U00F-DS6S
Sodium hydroxide 0.1N
CAS: 1310-73-2
Sodium hydroxide, 1.0N Standardized Solution
UFI: 69KJ-0TRD-6W0E-QYPU
Sodium hydroxide 1 mol/l (1 N) in aqueous solution AVS TITRINORM® Reagent Ph.Eur. chapter 4.2.2, USP, NF
CAS: 1310-73-2
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Observe label precautions.
Keep containers tightly closed in a cool well-ventilated place.
Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with this mixture.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and appropriate working operations should be given priority over the use of personal protective equipment. For exposed handling, use devices equipped with a local exhaust ventilation. See section 7.1.
full contact: Glove material: Nitrile rubber Glove thickness: 0.11 mm Break through time: > 480 min Splash contact: Glove material: Nitrile rubber Glove thickness: 0.11 mm Break through time: > 480 min The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374.
Tightly fitting safety glasses
Required when vapors/aerosols are generated. Recommended filter type: P 2. The company has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented
Wear alkali resistant protective clothing, provided with a CE marking.
Do not empty into drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable for 2 years under standard ambient conditions (room temperature).
See section 10.3
Violent reactions possible with: Nitriles, ammonium compounds, cyanides, magnesium, organic nitro compounds, organic combustible substances, phenols, powdered alkaline earth metals, acids.
No information available
Aluminum, zinc, tin, brass, acids
Carbon monoxide (CO), carbon dioxide (CO2), sodium oxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1824
- Shipping Name
- SODIUM HYDROXIDE SOLUTION
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sodium hydroxide solution (NaOH) = 2 N (2 mol/l)?
The signal word is danger.
What is the physical form of Sodium hydroxide solution (NaOH) = 2 N (2 mol/l)?
Sodium hydroxide solution (NaOH) = 2 N (2 mol/l) is a liquid with colorless. color. It has odorless. odor.
What is Sodium hydroxide solution (NaOH) = 2 N (2 mol/l) used for?
Reagent for analysis
What are the hazard statements for Sodium hydroxide solution (NaOH) = 2 N (2 mol/l)?
This substance has 2 hazard statements:
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.