Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sodium hydroxide solution c(NaOH) = 1 mol/l (1 N) Titripur® Reag. Ph Eur,Reag. USP
- Product Code
- 1.09137
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- 6QQX-855Q-X99P-WAHM
Identified Uses
Reagent for analysis
Manufacturers & Suppliers
Merck KGaA
manufacturer
Frankfurter Str. 250, D-64271 DARMSTADT
+49 (0)6151 72-0
Emergency Contacts
CHEMTREC (GB)
+(44)-870-8200418
CHEMTREC Ireland
+(353)-19014670
CHEMTREC India
001-803-017-9114
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| sodium hydroxide EC: 215-185-5 | 1310-73-2 | 3 - 5% | Yes |
For the full text of the H-Statements mentioned in this Section, see Section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation: fresh air. Call in physician.
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately.
After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses.
After swallowing: make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Tetra-n-butylammonium hydroxide solution in 2-propanol/methanol for titrations in nonaqueous media c[(C₄H₉)₄NOH] = 0.1 mol/l (0.1 N) Titripur® Reag. USP
---
Potassium hydroxide solution in ethanol c(KOH) = 0.5 mol/l (0.5 N) Titripur® Reag. Ph Eur,Reag. USP
---
Sodium hydroxide 0,5 mol/l 0,5 N AVS TITRINORM® Reagent Ph.Eur. chapter 4.2.2
CAS: 1310-73-2
Sodium hydroxide, 1.0N Standardized Solution
UFI: 69KJ-0TRD-6W0E-QYPU
Sodium hydroxide 0,5 mol/l 0,5 N AVS TITRINORM® Reagent Ph.Eur. chapter 4.2.2
CAS: 1310-73-2
Sodium hydroxide 0.1N
CAS: 1310-73-2
Silver nitrate solution c(AgNO3) = 0.1 mol/l (0.1 N) Titripur® Reag. Ph Eur,Reag. USP
UFI: 8JQX-75SX-A99P-KNCG
Silver nitrate solution c(AgNO₃) = 0.1 mol/l (0.1 N) Titripur® Reag. Ph Eur,Reag. USP
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Full contact: Material: Nitrile rubber, Minimum layer thickness: 0,11 mm, Break through time: 480 min, Material tested: KCL 741 Dermatril L. Splash contact: Material: Nitrile rubber, Minimum layer thickness: 0,11 mm, Break through time: 480 min, Material tested: KCL 741 Dermatril L. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves.
Tightly fitting safety goggles
Recommended Filter type: Filter type P2. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
Body Protection protective clothing
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1824
- Shipping Name
- SODIUM HYDROXIDE SOLUTION
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sodium hydroxide solution c(NaOH) = 1 mol/l (1 N) Titripur® Reag. Ph Eur,Reag. USP?
The signal word is danger.
What is the physical form of Sodium hydroxide solution c(NaOH) = 1 mol/l (1 N) Titripur® Reag. Ph Eur,Reag. USP?
Sodium hydroxide solution c(NaOH) = 1 mol/l (1 N) Titripur® Reag. Ph Eur,Reag. USP is a liquid with colorless color. It has odorless odor.
What is Sodium hydroxide solution c(NaOH) = 1 mol/l (1 N) Titripur® Reag. Ph Eur,Reag. USP used for?
Reagent for analysis
What are the hazard statements for Sodium hydroxide solution c(NaOH) = 1 mol/l (1 N) Titripur® Reag. Ph Eur,Reag. USP?
This substance has 2 hazard statements:
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
What is the melting point of Sodium hydroxide solution c(NaOH) = 1 mol/l (1 N) Titripur® Reag. Ph Eur,Reag. USP?
The melting point is No data available and the boiling point is No data available.