NextSDS Logo
Safety Data Sheet EN

DUNLOP INSECT OFF

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
DUNLOP INSECT OFF

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Product for removing insects from car bodies.

Uses advised against

No further relevant information available.

Manufacturers & Suppliers

E

EDCO

distributor

Adriaan Mulderweg 9-11, 5657 EM Eindhoven, Netherlands

+31-402501111

Emergency Contacts

Emergency Contact

112

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Eye Irrit. Cat. 2 H319

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H319 Causes serious eye irritation.

Precautionary Statements

P102 Keep out of reach of children.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501 Dispose of contents/container in accordance with local regulations.
If skin irritation or rash occurs: Get medical advice/attention.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Poly(oxy-1,2-ethanediyl), .alpha.-hydro-.omega.-hydroxy-, mono-C10-14 (even numbered)- alkyl ethers, phosphates EC: 614-625-7 68585-36-4 1.25% Yes
Alcohols, C10-14, ethoxylated EC: 613-933-9 66455-15-0 1.25% Yes
2-(2-butoxyethoxy)ethanol EC: 203-961-6 112-34-5 1% Yes
2-aminoethanol EC: 205-483-3 141-43-5 0.5% Yes
Reaction mass of 5-chloro-2- methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1) 55965-84-9 0.0011% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move the exposed person to fresh air at once. Provide fresh air, warmth and rest, preferably in a comfortable upright sitting position. Get medical attention if any discomfort continues.

Symptoms: high concentration of vapours or mists may cause irritation of the mucous membranes of the eyes and respiratory tract, tearing, redness, conjunctivitis, coughing, burning sensation in throat and nose.

Skin contact

Immediately remove contaminated clothing. Wash the skin with soap and water. Contaminated clothing should be washed before re-use. Consult a doctor, if disturbing symptoms occur.

Symptoms: possible redness, dryness, degreasing, slight irritation.

Eye contact

Make sure to remove any contact lenses from the eyes before rinsing. Promptly wash eyes with plenty of water while lifting the eye lids. Continue to rinse for at least 15 minutes. Consult a doctor, if disturbing symptoms occur.

Symptoms: tearing, redness, irritation.

Ingestion

Immediately rinse mouth. Do not induce vomiting. Never give anything by mouth to an unconscious person. Seek medical advice. Provide ventilation.

Symptoms: possible abdominal pains, nausea, vomiting, diarrhoea.

Immediate Medical Attention

Consult a doctor if disturbing symptoms occur or if discomfort continues.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

foam, carbon dioxide, dry powder, water spray.

Unsuitable media

do not use water in a jet.

Specific hazards

During combustion harmful gases consisting of carbon oxides and other unidentified products of decomposition may be produced. Do not inhale combustion products, it may cause health risk.

Instructions

Keep containers cool by spraying with water. If possible, remove containers from the danger zone.

Firefighter Protection

Wear full protective clothing and self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Removed from the danger area all persons not involved in the emergency. If necessary, order the evacuation. Avoid contact with skin, eyes. Avoid inhalation of vapours. Provide ventilation.

Environmental

Do not discharge into drains, water courses or into the ground.

Cleanup methods

Collect product and place it in correctly labelled containers. Flush product residues with water.

Materials: liquid binding materials (eg. sand, earth, silica, universal binding substances, Vermiculite etc.)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use only in a well-ventilated area. Avoid breathing vapor. Avoid contact with eyes, skin. When handling, use appropriate personal protective equipment (see Section 8). Keep away from heat. Do not smoke! When using do not eat or drink.

Storage

Store in dry, cool and well ventilated place. Store in original, tightly sealed containers. Containers which were opened should be resealed and stored upright to avoid leaking of the product.

Hygiene

When using do not eat, drink or smoke. Wash hand before and after work with product. Contaminated clothing should be washed before re-use.

Fire prevention

Keep away from heat. Do not smoke!

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Use gloves. Gloves must be inspected prior to use. The selected protective gloves have to satisfy the specifications of Directive 89/686 / EEC and EN 374.

Eyes

Avoid contact with eyes. Wear approved chemical safety goggles where eye exposure is reasonably probable. Use equipment for eye protection tested and approved under appropriate government standards such as EN 166.

Respiratory

Where risk assessment shows air-purifying respirators are appropriate use a face respirator. It is recommended to use respiratory equipment with filter.

Skin/Body

Wear protective clothing. Contaminated clothing should be washed before re-use.

Environmental

Local guidelines on emission limits for volatile substances must be observed for the discharge of exhaust air containing vapour. Do not discharge into drains, water courses or into the ground. Local authorities should be advised if any exposure to the environment occurs.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Properties Status
---
Flammability
No data available
Solidification Point
---
Voc Content
---
Physical State
Liquid
Solubility In Water
---
Evaporation Rate
---
Bulk Density
---
Dynamic Viscosity
---
Relative Evaporation Rate
---
Colour
Colourless
Decomposition Temperature
No data available
Form
---
Metal Corrosion
---
Cloud Point
---
Freezing Point
---
Upper Explosive Limit
No data available
Molecular Weight
---
Solubility In Fat
---
Solubility
Soluble in water
Vapor Density
---
Vapor Pressure
No data available
Colour Intensity
---
Appearance
---
State Under Standard Conditions
---
Flash Point
No data available
Kinematic Viscosity
No data available
Melting Point
No data available
Density
1,007 g/cm³
Partition Coefficient
No data available
Odor
According to assortment
Softening Point
---
Crystallisation Point
---
Odor Threshold
---
Boiling Point
ok. 100°C
Physical State Data
liquid
Auto Ignition Temperature
No data available
Relative Density
---
Ph
9-12
Lower Explosive Limit
No data available
Explosive Limits
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

Not reactive under normal conditions of storage and use.

Hazardous reactions

No hazardous reactions are expected under normal conditions of storage and use.

Avoid

Not determined.

Incompatible

Not determined.

Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for DUNLOP INSECT OFF?

The signal word is warning.

What is the physical form of DUNLOP INSECT OFF?

DUNLOP INSECT OFF is a liquid with colourless color. It has according to assortment odor.

What is the solubility of DUNLOP INSECT OFF?

Soluble in water

What is DUNLOP INSECT OFF used for?

Product for removing insects from car bodies.

What are the hazard statements for DUNLOP INSECT OFF?

This substance has 1 hazard statement:

  • H319: Causes serious eye irritation.

What is the melting point of DUNLOP INSECT OFF?

The melting point is No data available and the boiling point is ok. 100°C.