Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- (R)-(-)-Rolipram
- Product Code
- 1349
- Chemical Name
- (4R)-4-[3-(Cyclopentyloxy)-4-methoxyphenyl]pyrrolidin-2-one
Regulatory Identifiers
- CAS Number
- 85416-75-7 Check regulations →
Identified Uses
Laboratory chemicals, Manufacture of substances
Manufacturers & Suppliers
Tocris Bioscience
global supplier
The Watkins Building, Atlantic Road, Bristol, BS11 9QD, UK
+ 44 (0)117 916-3333
http://www.tocris.com
Emergency Contacts
Emergency Contact
+ 44 (0)117 916-3333
09.00 - 17.00 GMT
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| (R)-(-)-Rolipram | 85416-75-7 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air and monitor breathing. If breathing becomes difficult, give oxygen. If breathing stops, give artificial respiration. Consult a doctor.
Immediately wash skin with copious amounts of soap and water for at least 15 minutes. Remove contaminated clothing and shoes and wash before reuse. Consult a doctor.
Flush with copious amounts of water for at least 15 minutes. Consult a doctor.
Rinse mouth with water. Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Consult a doctor.
Immediate Medical Attention
Show this safety data sheet to the doctor in attendance. Immediate medical attention is required.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
In combustion, may emit toxic fumes.
Firefighter Protection
Wear suitable protective clothing to prevent contact with skin and eyes and self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas.
Do not let product enter drains.
Sweep up material and place in an appropriate container.
Related Products
Similar products with comparable safety profiles
(R)-(+)-α-Methylbenzylamine
CAS: 3886-69-9
(R)-(+)-Anatabine
---
(R)-(+)-Limonene
CAS: 5989-27-5
(R)-(+)-Limonene
CAS: 5989-27-5
(1R,2S)-rel-2-(3,4-Difluorophenyl)cyclopropanamine hydrochloride
CAS: 1156491-10-9
(R)-3-BOC-AMINOPIPERIDINE
CAS: 309956-78-3
(R)-(-)-2-Butanol
CAS: 14898-79-4
5-(N-Ethyl-N-isopropyl)amiloride
CAS: 1154-25-2
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use in a chemical fume hood, with air supplied by an independent system. Avoid inhalation, contact with eyes, skin and clothing. Avoid the formation of dust and aerosols. Use in a well-ventilated area. Keep away from sources of ignition. Avoid prolonged or repeated exposure.
Store in cool, well-ventilated area. Keep away from direct sunlight. Keep container tightly sealed until ready for use. Recommended storage temperature: Store at RT
Avoid inhalation, contact with eyes, skin and clothing. Avoid prolonged or repeated exposure.
Keep away from sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use in a fume hood where applicable. Ensure all engineering measures described under section 7 of SDS are in place. Ensure laboratory is equipped with a safety shower and eye wash station.
Use appropriate chemical resistant gloves (minimum requirement use standard BS EN 374:2003). Gloves should be inspected before use.
Use appropriate safety glasses.
If risk assessment indicates necessary, use a suitable respirator.
Wear appropriate protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Stable under recommended transport or storage conditions.
Hazardous reactions will not occur under normal transport or storage conditions. Decomposition may occur on exposure to conditions or materials listed below.
Heat, moisture.
Strong acids/alkalis, strong oxidising/reducing agents.
In combustion may emit toxic fumes. No known decomposition information.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for (R)-(-)-Rolipram?
The signal word is no signal word.
What is the physical form of (R)-(-)-Rolipram?
(R)-(-)-Rolipram is a solid appearing as off white solid . It has no data available odor.
What is the solubility of (R)-(-)-Rolipram?
Soluble to 100 mM in ethanol and to 100 mM in DMSO
What is (R)-(-)-Rolipram used for?
Laboratory chemicals, Manufacture of substances
What is the melting point of (R)-(-)-Rolipram?
The melting point is No data available and the boiling point is No data available.