NextSDS Logo
Safety Data Sheet EN

TEGOSIVIN CA 880

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEGOSIVIN CA 880
Chemical Name
Emulsion of alkoxy-silane

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Industrial use

Uses advised against

None known.

Manufacturers & Suppliers

E

Evonik Operations GmbH

manufacturer

Rellinghauser Str. 1-11 45128 Essen Germany

+49 201 173 01

Emergency Contacts

24-Hour Health Emergency

+49 2365 49 2232

24-Hour

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2 H319

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation.
H319 Causes serious eye irritation.

Precautionary Statements

P264 Wash face, hands and any exposed skin thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Triethoxy(octyl)silane EC: 220-941-2 2943-75-1 50 - 100% Yes
Alcohols, C11-15-secondary, ethoxylated EC: 614-295-4 68131-40-8 1 - 3% Yes
Alcohols, C11-15-secondary, ethoxylated EC: 614-295-4 68131-40-8 1 - 3% Yes
1,2-benzisothiazol-3(2H)-one EC: 220-120-9 2634-33-5 0.02% Yes
Reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no.247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no.220-239-6] EC: 911-418-6 55965-84-9 0.001 - 0.0015% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

fresh air supply, consult a doctor if feeling unwell.

Skin contact

In case of contact with skin wash off with soap and water. If skin irritation persists, call a physician.

Symptoms: Skin irritation

Eye contact

In case of contact with eyes rinse thoroughly with plenty of water. If symptoms persist, seek medical advice.

Symptoms: Serious eye irritation

Ingestion

Thoroughly clean the mouth with water In case of discomfort: Supply with medical care.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

foam, carbon dioxide, dry powder, water spray.

Unsuitable media

High volume water jet.

Specific hazards

In the event of fire the following can be released: Carbon monoxide, carbon dioxide, silicon dioxide. Under certain conditions of combustion traces of other toxic substances cannot be excluded.

Instructions

No specific precautions.

Firefighter Protection

Do not inhale explosion and/or combustion gases. Self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protective equipment.

Environmental

Do not allow to enter drains or waterways. Prevent product from getting into subsoil/soil.

Cleanup methods

Take up with absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Provide good ventilation of working area (local exhaust ventilation if necessary). Use respiratory protection during spraying. Do not inhale gases/vapours/aerosols. Avoid contact with skin and eyes.

Storage

Keep container tightly closed in a cool, well-ventilated place. Protect from heat and direct sunlight Homogenise before using. Protect from frost.

Hygiene

Avoid contact with skin and eyes.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

No data available.

Hands

Additional Information: The protective gloves to be worn must satisfy the specifications of Regulation (EU) 2016/425 and the resulting Standard EN374., Specific workplace situations must be considered separately. Material: Nitrile rubber. Break-through time: 240 min Glove thickness: 0.11 mm

Eyes

Safety glasses

Respiratory

in case of formation of vapours/aerosols: Short term: filter apparatus, combination filter A-P2

Skin/Body

protective clothing

Environmental

The environmental regulations on the control and monitoring of environmental exposures are to be observed.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
White
Colour Intensity
---
Form
liquid
Odor
Characteristic
Odor Threshold
not measured
Ph
6 - 8 (25 °C)
Melting Point
---
Boiling Point
Approximate 100 °C
Flash Point
> 100 °C (DIN EN ISO 2719)
Freezing Point
not measured
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
not measured
Vapor Pressure
not measured
Vapor Density
---
Relative Density
not measured
Bulk Density
No data available.
Density
Approximate 1 g/cm3 (25 °C) (DIN 51757)
Flammability
not measured
Upper Explosive Limit
not measured
Lower Explosive Limit
not measured
Explosive Limits
---
Auto Ignition Temperature
not measured
Decomposition Temperature
not measured
Solubility
---
Partition Coefficient
not measured
Solubility In Water
miscible
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
Not corrosive to metals
Dynamic Viscosity
30 - 300 mPa.s (25 °C)
Kinematic Viscosity
30 - 300 mm2/s (25 °C, calculated)
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable under normal conditions.

Reactivity

see section "Possibility of hazardous reactions".

Hazardous reactions

No hazardous reactions with proper storage and handling

Avoid

Freezing. direct sunlight

Incompatible

Not known.

Decomposition

None with proper storage and handling.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TEGOSIVIN CA 880?

The signal word is warning.

What is the physical form of TEGOSIVIN CA 880?

TEGOSIVIN CA 880 is a liquid with white color. It has characteristic odor.

What is TEGOSIVIN CA 880 used for?

Industrial use

What are the hazard statements for TEGOSIVIN CA 880?

This substance has 2 hazard statements:

  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.