Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Tergitol™
- Product Code
- NP9
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- This product is a mixture. REACH Registration Number see section 3.
- UFI Code
- Y511-C6F0-S99E-8CC9
Identified Uses
Laboratory chemicals, Manufacture of substances
Uses advised against
This product is not intended for consumer use.
Manufacturers & Suppliers
Merck Life Science BV/SRL
manufacturer
Brusselsesteenweg 288, B-3090 OVERIJSE
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| α-(4-Nonylphenyl)-ω-hydroxy-poly(oxy-1,2-ethanediyl) branched EC: 500-315-8 | 127087-87-0 | 90 - 100% | Yes |
| Dinonylphenyl polyoxyethylene EC: 618-488-4 | 9014-93-1 | 1 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon oxides. Combustible.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
No data available
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For precautions see section 2.2.
No data available
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it. Full contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested: Dermatril® (KCL 740 / Aldrich Z677272, Size M) Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested: Dermatril® (KCL 740 / Aldrich Z677272, Size M) data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail sales@kcl.de, test method: EN374 If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the EC approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.
Prevent product from entering drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No data available
No data available
No data available
No data available
Strong acids, Strong bases, Strong oxidizing agents
In the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (α-(4-Nonylphenyl)-ω-hydroxy-poly(oxy-1,2-ethanediyl) branched)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Tergitol™?
The signal word is warning.
What is the physical form of Tergitol™?
Tergitol™ is a liquid with colorless, light yellow color. It has mild odor.
What is Tergitol™ used for?
Laboratory chemicals, Manufacture of substances
What are the hazard statements for Tergitol™?
This substance has 3 hazard statements:
- H302 + H332: Harmful if swallowed or if inhaled.
- H319: Causes serious eye irritation.
- H411: Toxic to aquatic life with long lasting effects.