Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BRAKE CLEANER
- Product Code
- 0890 108 7
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Brake cleaner
Manufacturers & Suppliers
A. Wuerth GmbH & Co. KG
manufacturer
Reinhold-Würth-Str. 12-17, D-74653 Künzelsau
++49 (0)7940/15-0
Emergency Contacts
Advisory office in case of poisoning
+49 30 / 19240
A. Wuerth GmbH & Co. KG
++49 (0)7940/15-2552
7.00h - 18.00h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS01
GHS02
GHS07
GHS09
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Naphtha (petroleum), hydrotreated light EC: 265-151-9 | --- | 80 - 100% | Yes |
| Carbon dioxide EC: 204-696-9 | --- | 1 - 10% | No |
For complete wording of the R-phrases, refer to point 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person from danger area. Supply person with fresh air and consult doctor according to symptoms. If the person is unconscious, place in a stable side position and consult a doctor.
Wash thoroughly with soap and copious water - remove contaminated clothing immediately.
Symptoms: redness
Wash thoroughly for several minutes using copious water
Do not induce vomiting.
Symptoms: Typically no exposure pathway. Danger of aspiration.
Immediate Medical Attention
call doctor immediately
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, Water jet spray, Extinction powder, Alcohol resistant foam
High volume water jet
Danger of explosion by prolonged heating. Explosive vapour/air mixture
Cool container at risk with water.
Firefighter Protection
Protective respirator with independent air supply. According to size of fire. Full protection, if necessary
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove possible causes of ignition - do not smoke. Ensure sufficient supply of air. Avoid inhalation, and contact with eyes or skin. If applicable, caution - risk of slipping.
Collect using absorbant material
Materials: Universal binding medium, sand, kieselguhr
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid inhalation of the vapours. Do not use on hot surfaces. Avoid contact with eyes or skin. Observe directions on label and instructions for use. Use working methods according to operating instructions.
Store products only unopened, in original packing. Not to be stored in gangways or stair wells. Observe special regulations for aerosols. Observe TRG 300 (German regulation). See point 10.2. Store in a well ventilated place. Keep protected from direct sunlight and temperatures over 50°C.
Eating, drinking, smoking, as well as food-storage, is prohibited in work-room. Wash hands before breaks and at end of work.
Keep away from sources of ignition - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Solvent resistant protective gloves (EN 374). Recommended. Protective nitrile gloves (EN 374). Permeation time (penetration time) in minutes: 480.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable when handled and stored correctly.
Pressure increase will result in danger of bursting.
Heating, open flame, ignition sources
See point 7. Avoid contact with strong oxidizing agents.
See point 5.3. No decomposition when used as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BRAKE CLEANER?
The signal word is danger.
What is the physical form of BRAKE CLEANER?
BRAKE CLEANER is a aerosol with colourless color. It has solvent odor.
What is BRAKE CLEANER used for?
Brake cleaner
What are the hazard statements for BRAKE CLEANER?
This substance has 5 hazard statements:
- H224: Product is highly flammable.
- H241: Danger of bursting (explosion) when heated.
- H315: Irritation of the skin.
- H336: Vapours may cause drowsiness and dizziness
- H411: Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
What is the melting point of BRAKE CLEANER?
The melting point is n.av. and the boiling point is n.av..