Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BRAKE & PARTS CLEANER
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Detergent, Cleaning product
Uses advised against
No additional information available
Manufacturers & Suppliers
ARDECA LUBRICANTS
national supplier
Oudenaardestraat 49, 8570 Vichte - BELGIUM
+32 56 72 62 29
Ardeca Lubricants USA
importer
P.O. Box 1102 Germantown, MD 20875 – UNITED STATES
1(877) 772-8977
Emergency Contacts
INFOTRAC
1(800) 535-5053
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Naphtha (petroleum), hydrotreated light EC: 265-151-9 | 64742-49-0 | 45% | Yes |
| Isobutane EC: 200-857-2 | 75-28-5 | 2.5 - 10% | Yes |
| Naphtha (petroleum), hydrotreated light EC: 265-151-9 | 64742-49-0 | 2.5 - 10% | Yes |
| CARBON DIOXIDE EC: 204-696-9 | 124-38-9 | 2.5% | No |
| Propane EC: 200-827-9 | 74-98-6 | 2.5% | Yes |
| Acetone | 67-64-1 | 25 - 50% | Yes |
| Aliphatic Hydrocarbons | --- | 30% | No |
Notes
Full text of H- phrases: see section 16
First Aid Measures
Emergency procedures for chemical exposure incidents
Move the affected person away from the contaminated area and into the fresh air Call a doctor.
Remove all contaminated clothing and footwear Wash with soapy water If case of redness or irritation, call a doctor.
Symptoms: redness or irritation
Immediately rinse with water for a prolonged period while holding the eyelids wide open Remove contact lenses, if present and easy to do. Continue rinsing Consult an ophtalmologist if irritation persists.
Do not induce vomiting Take medical advice immediately.
Immediate Medical Attention
Call a doctor. Take medical advice immediately. Consult an ophtalmologist if irritation persists.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, Carbon dioxide (CO2) Powder.
Strong water jet.
Under fire conditions closed containers may rupture or explode. May form flammable/explosive vapour-air mixtures.
Cool down the containers exposed to heat with a water spray. Contain the extinguishing fluids by bunding.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with skin and eyes. Do not breathe vapours. No flames, no sparks. Eliminate all sources of ignition.
Contain the spilled material by bunding. Do not discharge into drains or rivers.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation of the work station, Avoid contact with skin and eyes, Avoid the build-up of electrostatic charge, No flames, no sparks. Eliminate all sources of ignition, No smoking, Do not breathe spray, Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50 °C. Do not pierce or burn, even after use.
Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50 °C.
Do not drink, eat or smoke in the workplace, Always wash hands after handling the product.
No flames, no sparks. Eliminate all sources of ignition, No smoking, Avoid the build-up of electrostatic charge
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Nitrile-rubber protective gloves Layer thickness : >= 0.45 mm Breakthrough time : refer to the recommandations of the supplier.
Sealed safety goggles.
In the event of insufficient ventilation: Gas filter type AX In case of repeated or prolonged exposure : Self-contained breathing apparatus.
Protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
Toxic to aquatic life with long lasting effects.
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.4. Mobility in soil
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BRAKE & PARTS CLEANER?
The signal word is danger.
What is the physical form of BRAKE & PARTS CLEANER?
BRAKE & PARTS CLEANER is a gas appearing as aerosol. with colourless. color. It has petrol. odor.
What is the solubility of BRAKE & PARTS CLEANER?
Material highly soluble in water. Organic solvent:Soluble
What is BRAKE & PARTS CLEANER used for?
Detergent, Cleaning product
What are the hazard statements for BRAKE & PARTS CLEANER?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol
- H315: Causes skin irritation
- H336: May cause drowsiness or dizziness
- H411: Toxic to aquatic life with long lasting effects