Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MOBIL SHC GEAR 150
- Product Code
- 2015604090A0, 615039-00, 97BQ57
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Gear oil
Manufacturers & Suppliers
EXXON MOBIL CORPORATION
manufacturer
3225 GALLOWS RD., FAIRFAX, VA. 22037 USA
800-662-4525
http://www.exxon.com
Emergency Contacts
24 Hour Health Emergency
609-737-4411
Transportation Emergency Phone
800-424-9300
ExxonMobil Transportation No.
281-834-3296
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Reportable Hazardous Substance(s) or Complex Substance(s)
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| DITRIDECYL ADIPATE | 16958-92-2 | 10 - 20% | Yes |
* All concentrations are percent by weight unless material is a gas. Gas concentrations are in percent by volume.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove from further exposure. If breathing has stopped, assist ventilation with a mechanical device or use mouth-to-mouth resuscitation.
Symptoms: respiratory irritation, dizziness, nausea, or unconsciousness
Wash contact areas with soap and water.
Flush thoroughly with water.
Symptoms: irritation
First aid is normally not required.
Symptoms: discomfort
Immediate Medical Attention
If respiratory irritation, dizziness, nausea, or unconsciousness occurs, seek immediate medical assistance. If product is injected into or under the skin, or into any part of the body, regardless of the appearance of the wound or its size, the individual should be evaluated immediately by a physician as a surgical emergency. If irritation occurs, get medical assistance. Seek medical attention if discomfort occurs.
Medical Treatment
Early surgical treatment within the first few hours may significantly reduce the ultimate extent of injury.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames.
Straight Streams of Water
Evacuate area. Prevent runoff from fire control or dilution from entering streams, sewers, or drinking water supply. Firefighters should use standard protective equipment and in enclosed spaces, self-contained breathing apparatus (SCBA). Use water spray to cool fire exposed surfaces and to protect personnel.
Firefighter Protection
Firefighters should use standard protective equipment and in enclosed spaces, self-contained breathing apparatus (SCBA).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop leak if you can do it without risk.
Dike far ahead of liquid spill for later recovery and disposal. Prevent entry into waterways, sewers, basements or confined areas.
Prevent entry into waterways, sewers, basements or confined areas.
Land Spill: Recover by pumping or with suitable absorbent. Water Spill: Remove from the surface by skimming or with suitable absorbents.
Materials: suitable absorbent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent small spills and leakage to avoid slip hazard. Material can accumulate static charges which may cause an electrical spark (ignition source). When the material is handled in bulk, an electrical spark could ignite any flammable vapors from liquids or residues that may be present (e.g., during switch-loading operations). Use proper bonding and/or ground procedures. However, bonding and grounds may not eliminate the hazard from static accumulation.
Do not store in open or unlabelled containers. The container choice, for example storage vessel, may effect static accumulation and dissipation.
Material can accumulate static charges which may cause an electrical spark (ignition source). Use proper bonding and/or ground procedures.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Material is stable under normal conditions.
Will not occur.
Excessive heat. High energy sources of ignition.
Strong oxidizers
Material does not decompose at ambient temperatures.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MOBIL SHC GEAR 150?
The signal word is no signal word.
What is the physical form of MOBIL SHC GEAR 150?
MOBIL SHC GEAR 150 is a liquid appearing as pale yellow with pale yellow color. It has characteristic odor.
What is MOBIL SHC GEAR 150 used for?
Gear oil